Filter
Top Products
- 18 -
Press the Power Button on the Remote Control to select the Serviceman Adjustment .
For Adjustments:
Sub-Data Adjustment
Default
Level
B00 SUB-COLOR 31
B01 SUB-TINT 40
B02 SUB-BRIGHTNESS 40
B03 SUB-CONTRAST 16
B04 SUB-TINT VIDEO 16
B05 SUB-COLOR VIDEO 22
B06 SUB-TINT COMP 63
B07 SUB-COLOR COMP 28
B08 SUB SHARP TV/VIDEO 10
B09 SUB SHARP S-VHS/COMP 17
B0A SUB-CONTRAST FIXED 15
Cut-Off Adjustment
Default
Level
C00 CUT-OFF R 128
C01 CUT-OFF G 128
C02 CUT-OFF B 128
C03 BRIGHTNESS 31
C04 G DRIVE 64
C05 B DRIVE 64
C06 DRIVE C TEMP 8
C07 CONT C TEMP 5
C08 CUTOFF R COMP 112
C09 CUTOFF G COMP 114
C0A CUTOFF B COMP 103
1.Press Channel Up/Down on the
Remote Control to select one of
the available Service Adjustments
(a in Fig. 20).
Note: Write Down the original
value set (b in
Fig. 20
) for
each address before
modifying anything. It is
easy to erroneously adjust
the wrong item.
2.Press Volume Up/Down on the
Remote Control to adjust the
level of the selected Service
Adjustment (b in Fig. 20).
CH
CH
CH
PW
To D Items.
IMPORTANT NOTE:
Always Exit the Serviceman
Mode Following Adjustments.
CH
CH
PW
CH