Filter
Top Products
24
SYSTEM
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
12 SYS H (HD) 0550
:
1100
:
1650
–550
:
0
:
550
For adjusting the system phase of the HD SDI output (in 27 ns steps).
–: The phase is moved ahead.
+: The phase is moved back.
The underlining denotes the factory mode.
14 SYS SC (SD) 0000
:
0108
:
0216
–108
:
0
:
108
For adjusting the system phase of the VIDEO output and SD SDI output.
(Total variable range: ±180 degrees or more)
–: The phase is moved ahead.
+: The phase is moved back.
15 SYS H (SD) 0000
:
0429
:
0858
–429
:
0
:
429
For adjusting the system phase of the VIDEO output and SD SDI output.
(in 74 ns steps)
–: The phase is moved ahead.
+: The phase is moved back.
<Note>
While the value is being adjusted, the sound output will be muted; however
this is normal and not indicative of a problem. When the adjustment is
finished, sound will be output.
18 SCH COAR (SD) 0000
0001
0002
0003
0
90
180
270
For adjusting the SCH (subcarrier to horizontal) phase of the VIDEO
output. (4 positions at 90-degree increments)
The SC phase is changed, and the H phase remains unchanged.
19 SCH FINE (SD) 0000
:
0032
:
0064
–32
:
0
:
32
For adjusting the SCH (subcarrier to horizontal) phase of the VIDEO
output. (Variable range of ±45 degrees or more)
The SC phase is changed, and the H phase remains unchanged.
Use together with No.18 SCH COAR (SD) to cover ±180 degrees.
20 AV PHASE 0000
:
0100
:
0200
–100
:
0
:
100
For adjusting the phase of the AUDIO output with respect to the VIDEO
output (in 20.8 µs steps).
–: The audio output phase is moved ahead of the video output.
+: The audio output phase is moved back from the video output.
<Note>
Items No.12 to No.20 are not initialized even when the initialization operation is conducted.
Setup Menus