Filter
Top Products
31
Setup Menus
511 DF MODE
0000
0001
DF
NDF
For setting the DF or NDF mode for CTL and TCG.
0: The drop frame mode is used.
1: The non-drop frame mode is used.
<Note>
The drop frame mode setting is valid when the REMOTE/MENU/LOCAL
switch is at the LOCAL position and ENA has been selected as the menu
item No.001 (LOCAL ENA) setting.
512 TC OUT REF
0000
0001
VOUT
TC_IN
For setting the signals to whose phase the phase of the time code which is
output from the TC OUT connector is to be aligned in response to the
external LTC input when EXT has been selected as the menu item No.520
(TC MODE SW) setting. (Only in the E-E mode)
0: For aligning with the output video signal.
1: For aligning with the external time code input signal.
520 TC MODE SW
0000
0001
INT
EXT
For setting the time code which will serve as the reference during
recording.
0: Time code generated by the internal time code generator
1: External time code
530 TC PRESET For setting the time code value of the internal time code generator.
00000000 to 23595929
531 UB PRESET For setting the user’s bit value of the internal time code generator.
00000000 to FFFFFFFF
TIME CODE
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
The underlining denotes the factory mode.