Filter
Top Products
RQT9378
33
To select these options, perform steps 1–4 (> 32)
(Continued on the next page)
“Audio”
Dynamic Range Compression [BD-V] [AVCHD] [DVD-V] [DivX]
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
Change the dynamic range (> 50) for late night viewing.
≥On ≥Off
≥Auto: Effective only when Dolby TrueHD is played.
Digital Audio Output (> 8)
≥Press [OK] to show the following settings.
Dolby D/Dolby D +/
Dolby TrueHD
Select whether Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS Digital
Surround, DTS-HD High Resolution
Audio or DTS-HD Master Audio is output
in “Bitstream” or “PCM” format.
≥Not making the proper settings may
result in noise.
≥If the unit is connected with the
HDMI AV OUT terminal, the
specifications of the connected
equipment take preference over this
unit and audio selected in these
items may not be output (e.g., when
a television is connected, the HDMI
audio output of this unit is limited to
down-mixed 2ch.)
≥Bitstream
:
Select “Bitstream” when the connected equipment can decode the
respective audio format.
–Connect equipment supporting HDMI (High Bit rate Audio) and use a
High Speed HDMI Cable in order to output high bit rate audio such as
Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio or
DTS-HD Master Audio.
≥PCM:
Select “PCM” when the connected equipment cannot decode the
respective audio format.
Refer to the operating instructions for connected devices to verify whether or
not they can decode each of the audio formats.
DTS/DTS-HD
BD-Video Secondary Audio
[BD-V]
Turn on/off the button click sound on the menu and audio with
secondary video in picture-in-picture mode. (> 22)
≥On
: The primary audio and secondary audio are mixed and output. The
sampling frequency is converted to 48 kHz.
≥Off: The button click sound on the menu and secondary audio are not
output.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz.
≥Signals are converted to 48 kHz despite the settings across in
the following cases:
–when the signals have a sampling frequency of 192 kHz
–when the disc has copy protection
–when “BD-Video Secondary Audio” is set to “On”
≥On: Signals are converted to 48 kHz. (Choose when the connected
equipment cannot process signals with sampling frequency of
96 kHz.)
≥Off
: Signals are output as 96 kHz. (Choose when the connected
equipment can process signals with sampling frequency of
96 kHz.)
Downmix
Switch the downmix system for playing back multi-channel
surround sound.
≥When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is
set to “Bitstream”, there are no downmix effects for the outputted
audio.
≥The audio will be outputted in “Stereo” in the following cases.
–AVCHD playback
–Playback of button click sound on the menu and audio with
secondary video in picture-in-picture mode
≥Stereo
: When connected to equipment that does not support
the virtual surround function.
≥Surround encoded: When connected to equipment that supports the
virtual surround function.
High Clarity Sound [BD80 ]
When the analog video terminal is not being used, the electrical
current that flows through the analog video circuit can be stopped.
This prevents adverse effects on the audio signals and produces
clearer sound.
≥Set to “Enable” and then set “High Clarity Sound” on the
on-screen menu to “On”. (> 31)
≥Use this when outputting image via HDMI terminal. Analog image
will not be output via COMPONENT VIDEO OUT terminal or
VIDEO OUT terminal.
≥Enable ≥Disable
“Display”
Status Messages
Choose whether to show status messages automatically.
≥Automatic
≥Off
On-screen Language
Choose the language for these menus and on-screen messages.
≥English
≥Français ≥Español
Screen Saver Function
This is to prevent burn-in on the screen.
≥When this is set to “On”, the masked-off area on the screen
becomes gray.
[Only when connecting with an HDMI cable or a component video
cable and “HDMI Resolution” (> 34) is set to any other mode
than “480p”, or “Component Video Resolution” (> 34) is set to
“720p” or “1080i”]
≥On:
If there is no operation for 10 minutes or more, the displayed screen
switches to the other states automatically.
–When the Direct Navigator or FUNCTIONS menu is displayed, the
display returns to the screen saver mode.
–When CD or MP3 is played, the display returns to the screen saver
mode. (Playback continues.)
–When still pictures are shown (except for slideshow), the display returns
to the Direct Navigator screen.
≥Off
Settings
RQT9378~Body_mst.fm 33 ページ ２００９年１月１５日 木曜日 午前１１時２２分