Filter
Top Products
Reference
31
VQT3V42
Cannot hear the desired audio type.
¾ Check the connections and the “Digital Audio
Output” settings. (> 9 , 25)
¾ To output audio from a device connected with
an HDMI cable, set “HDMI Audio Output” to
“On” in the Setup menu. (> 25)
Disc cannot be played.
¾ The disc is dirty. (> 4)
Still pictures (JPEG) do not play back
normally.
¾ The images that were edited on the PC, such
as Progressive JPEG, etc., may not be played
back.
I can’t play back BD-Live.
¾ Confirm that this unit is connected to the
broadband Internet. (> 10)
¾ Confirm the “BD-Live Internet Access”
settings. (> 26)
¾ Confirm a USB device is connected to a USB
port. (> 14)
I can’t connect to the network.
¾ Confirm the network connection and settings.
(> 10, 11, 26)
¾ Check the operating instructions for each
device and connect accordingly.
When using wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
¾ Higher transfer rate router such as 802.11n
(2.4 GHz) wireless router may solve the
problem. If you use 802.11n (2.4 GHz)
wireless router, it is necessary to set the
encryption type to “AES”.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
Audio
Playback
Network
¾ On the “Wireless Settings” screen (> 26), the
continuous lighting of at least 4 “Reception”
indicators is the target for a stable
connection. If 3 or fewer indicators are lit or
the connection is being interrupted, change
the position or angle of your wireless router
and see if the connection state improves. If
there is no improvement, connect to a wired
network and perform the “Easy Network
Setting” (> 11) again.
DMP-BD77GN-VQT3V42.book 31 ページ ２０１２年２月２１日 火曜日 午前１０時５分