5
RQT9407
Accessory information
Using the remote control
Batteries
Insert so the poles (i and j) match those in the remote control.
When closing the lid, insert it from the j (minus) side.
≥Use alkaline or manganese batteries.
≥Do not mix old and new batteries.
≥Do not use different types at the same time.
≥Do not heat or expose to flame.
≥Do not leave the battery(ies) in an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.
≥Do not take apart or short circuit.
≥Do not attempt to recharge alkaline or manganese batteries.
≥Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remove batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
Use
If you cannot operate the unit or other equipment using the remote
control after changing the batteries, please re-enter the codes
(> 12, 41).
Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.
(Product numbers correct as of February 2009. These may be subject to change.)
∏∏∏
1 Remote control
(N2QAYB000380)
1 Audio/Video cable 2 Batteries
for remote control
∏∏
For Saudi Arabia
∏
For Thailand
[For[Aust ralia[and[New[Zealand]
1 AC mains lead
[For]Middle]East]
2 AC mains lead
[For[Asia]
2 AC mains lead
For use with this unit only. Do not use it with other equipment. Also, do not use cords for other equipment with this unit.
R6/LR6, AA
20˚
30˚
20˚
30˚
Remote control signal sensor
7 m directly in front of the unit
Getting started
RQT9407~Safety_mst.fm 5 ページ 2009年2月23日 月曜日 午後8時9分