Filter
Top Products
61
RQT8380
Tabs Menus Options (Underlined items are the factory presets.)
Connection
TV Aspect (➡ 17) Set to match the type of television
connected.
≥16:9 ≥4:3
≥Letterbox
Progressive (➡ 18)
This setting is fixed with “Off”
if you set “AV1 Output” to
“RGB 1 (without
component)” or “RGB 2
(without component)”.
≥On ≥Off
TV System (➡ 63) ≥PAL ≥NTSC
HDMI Settings
≥Press [ENTER] to show the following settings.
HDMI Video Format
You can only select items compatible with the connected
equipment. This setting normally does not need to be
changed. However if you are concerned about output picture
quality, it may be improved by changing the setting.
Still pictures play at a resolution equivalent to 480p
regardless of the settings.
≥576i/480i
≥576p/480p
≥720p
≥1080i
≥Automatic
: Automatically selects the output resolution best
suited to the connected television (1080i, 720p,
576p/480p or 576i/480i).
Aspect for 4:3 Video ≥4:3
: Picture is output as original aspect.
≥16:9: Picture is output as 16:9 aspect with side panels.
Digital Audio Output ≥HDMI and Optical
≥Optical Only: Select when this unit is connected to an amplifier
with an optical digital audio cable and connected
to a TV with an HDMI cable and you want to enjoy
the highest quality of audio from discs (➡ 15).
Control with HDMI ≥On
≥Off: Select when you do not want to use Control with HDMI.
AV1 Output
Selects the output from the AV1 terminal.
Select “RGB 1 (without component)” or “RGB 2 (without
component)” for RGB output.
Select “Video (with component)” or “S Video (with component)”
for component output (progressive output).
Set according to the signal and terminal of the connected TV.
≥If this unit is connected with an HDMI cable, you cannot select
“RGB 1 (without component)” or “RGB 2 (without component)”.
≥
Video (with component):
Select when a TV is connected that can receive a composite signal.
≥
S Video (with component):
Select when a TV is connected that can receive an S Video signal.
≥RGB 1 (without component):
Select when a TV is connected that can receive an RGB signal.
If you always would like to view the picture from the unit in RGB
signal, select this mode. The TV screen will automatically
switch to display the picture from the unit when the unit is
turned on.
≥RGB 2 (without component):
Select when a TV is connected that can receive an RGB signal.
If you would like to switch to display the picture from the unit
only when playback or viewing menus, select this mode.
AV2 Input
This setting is according to the output signal of the connected
equipment.
≥Video
≥S Video
Others
Remote Control (➡ 19) ≥DVD 1 ≥DVD 2 ≥DVD 3
Clock (➡ 64)
Power Save
≥Refer to the following when “Power Save” is set to “On”.
–“FL Display” is automatically set to “Automatic” (➡ 60).
–The “Quick Start” function does not work. (It is automatically
turned to “Off”.)
≥If “Quick Start” is set to “On”, “Power Save” is automatically
turned to “Off”.
≥On: Power consumption is minimized when the unit is turned to
standby (➡ 74).
≥Off
Quick Start
The Quick Start feature enables this unit to be ready to start
recording as quick as approx. 1 second
§
after turning it on. You
can start recording soon after deciding you want to record
something.
§
Only when recording to the HDD or DVD-RAM.
≥
If this is set to “On”, “Power Save” is automatically turned to “Off”.
≥Startup takes up to a minute when:
–You play a disc or start recording to discs other than DVD-
RAM.
–You want to make other operations.
–The clock has not been set.
≥On
≥Off: Standby power consumption is less than when this is set
to “On”.
[For]Australia]and]N.Z.]
Country
≥Australia
≥New Zealand
≥Others
DivX Registration ≥You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content (➡ 33).
Initialize
≥Press [ENTER] to show the following settings.
Shipping Condition
All the settings except for the ratings level, ratings password
and time settings return to the factory preset. The timer
recording programmes are also cancelled.
≥Ye s
≥No
Default Settings
All the settings other than the programmed channels, time
settings, country settings
§
, disc language settings, ratings
level, ratings password, remote control code, return to the
factory presets.
§
Only for Australia and N.Z.
≥Ye s
≥No
Changing the unit’s settings
EH65.book Page 61 Monday, April 3, 2006 5:10 PM