Panasonic DMR-EH65 DVR User Manual


 
72
RQT8380
Troubleshooting guide
Still pictures
To reset this unit
Cannot display Direct Navigator
screen.
This screen cannot be displayed during recording or copy.
Cannot edit or format a card. Release the card’s protection setting. (With some cards, the “Write Protection Off” message
sometimes appears on the screen even when protection has been set.)
53
The contents of the card cannot
be read.
The card format is not compatible with the unit. (The contents on the card may be damaged.)
Format using FAT 12 or FAT 16 with other equipment or format the card with this unit.
The card contains a folder structure and/or file extensions that are not compatible with this
unit.
Turn off and then turn on the unit again.
You can use SD Memory Cards with capacities from 8 MB to 2 GB.
7, 31
54
7
Copying, deleting and setting
protection takes a long time.
When there are a lot of folders and files, it may sometimes take a few hours.
When repeating copying or deleting, it may sometimes take a long time. Format the disc or
card.
54
To return all the settings other
than the main ones to the factory
preset
Select “Yes” in “Shipping Condition” in the Setup menu. All the settings except for the ratings
level, ratings password and time settings return to the factory preset. The timer recording
programmes are also cancelled.
Select “Yes” in “Default Settings” in the Setup menu. All the settings other than the
programmed channels, time settings, country settings
§
, disc language settings, ratings level,
ratings password, remote control code, return to the factory presets.
Press and hold [X CH] and [CH W] on the main unit until the Country setting screen
§
or the
Auto-Setup screen appears. All the settings except for the ratings level, ratings password and
time settings return to the factory preset. The timer recording programmes are also
cancelled.
§
Only for Australia and N.Z.
61
61
To reset the ratings level
settings
While the disc tray is open, press [DRIVE SELECT] to select the DVD drive, then press and
hold [¥ REC] and [1] (PLAY) on the main unit at the same time for 5 or more seconds.
To restore the unit if it freezes
due to one of the safety devices
being activated
Press and hold [Í/I] on the main unit for 10 seconds. (The settings remain.)
EH65.book Page 72 Monday, April 3, 2006 5:10 PM