Filter
Top Products
RQTC0128
SETTING STATE Display the current setting of the items below
PCM OUTPUT
Check the digital
input limitations of the
equipment you connect
using COAXIAL terminal
and select the maximum
sampling frequency of
PCM digital output.
UP TO 48kHz: When connected to equipment compatible
with 44.1 or 48 kHz
UP TO 96kHz: When connected to equipment compatible
with 88.2 or 96 kHz
Signals from copy-protected discs are converted to 48
or 44.1 kHz.
Some equipment cannot handle sampling frequencies
of 88.2 kHz, even if they can handle 96 kHz. Read your
equipment’s operating instructions for details.
•
•
DOLBY DIGITAL
With COAXIAL or HDMI
AV OUT connections
( pages 8 and 9)
BITSTREAM
PCM
Select “BITSTREAM” when the equipment
can decode the bitstream (digital form of
multi-channel data). Otherwise, select “
PCM”.
(If the bitstream is output to the equipment
without a decoder, high levels of noise can be
output and may damage your speakers and
hearing.)
DTS
With COAXIAL or HDMI
AV OUT connections
( pages 8 and 9)
BITSTREAM
PCM
DYNAMIC RANGE
ON: Adjusts for clarity even when the volume is low
through compressing the range of the lowest sound level
and the highest sound level. Convenient for late night
viewing. (Only works with Dolby Digital.)
OFF
Changing the player settings
AUDIO OUT ON: Audio output is from HDMI AV OUT terminal.
OFF: Audio output is not from HDMI AV OUT terminal.
RGB RANGE STANDARD
ENHANCED:
When the black and white images are not distinct.
It only works when the COLOR SPACE ( page 18,
On-Screen Menu 4) is set to RGB.
•
EZ Sync ON: The EZ Sync
TM
“HDAVI Control
TM
” is available
( page 24).
OFF
SETTING STATE Display the current setting of the items below
REGISTRATION
Displays the unit’s
registration code.
SHOW CODE: You need this registration code to purchase
and play DivX Video-on-Demand (VOD) content
( page 24, About DivX VOD contents).
JPEG TIME To change the slideshow timing
1 SEC to 15 SEC (in 1 unit) 15 SEC to 60 SEC (in 5 unit)
60 SEC to 180 SEC (in 30 unit)
“3 SEC” is the factory preset.
•
FL DIMMER
Changes the brightness
of the unit’s display.
BRIGHT DIM
AUTO
: The display is dimmed, but brightens only when you
perform some operations.
AUTO POWER OFF
ON: The unit switches to standby mode after about 30
minutes in the stop mode.
OFF
QUICK SETUP SET: Displays the QUICK SETUP settings
DVD-VR/DATA
Select format to play
DVD-RAM discs.
DVD-VR: To play on DVD-RAM.
DATA: To play
or contents on DVD-RAM.
DEFAULTS
This returns all values in
the Setup menus to the
default settings.
RESET
The password screen is shown if “RATINGS” (
page 19) is
set. Please enter the same password and press [ENTER],
then turn the unit off and on again.
When audio is output from HDMI AV OUT terminal, and the connected equipment
does not support the item selected, the actual output will depend on the performance
of this connected equipment.
SETTING STATE Display the current setting of the items below
LANGUAGE ENGLISH FRANÇAIS ESPAÑOL
SETTING STATE Display the current setting of the items below
VIDEO PRIORITY ON: When connected through the HDMI AV OUT terminal.
Video is output from the HDMI terminal. Video is also
output from the COMPONENT VIDEO OUT terminal,
but only in 480i (interlace).
OFF: When connected through the COMPONENT
VIDEO OUT terminal. Video is output from the
COMPONENT VIDEO OUT terminal according to the
setting of “VIDEO OUT (I/P)” (
page 19, “VIDEO”
menu). Video is also output from the HDMI terminal.
Changing the player settings
20
“AUDIO” menu
“DISPLAY” menu
“HDMI” menu
“OTHERS” menu
MP3 JPEG
DVD-VR
DVD-S53 (RQTC0128-2P)_P_PC_PX.indd 20 3/21/2007 11:29:42 AM