Filter
Top Products
14
RQT8685
Changing the player settings
≥Referring to page 14 to 15, change as required.
≥The settings remain intact even if you switch the unit to standby.
≥Underlined items are the factory preset.
∫ “DISC” tab
∫ “VIDEO” tab
12345
Shows Setup menu. Select the tab. Select the item. Make the settings. Press to exit.
SETUP
Select
Register
Select
Register
S
elect
Register
SETUP
SETTING STATE Display the current setting of the items below
AUDIO
Choose the audio
language.
ENGLISH
(LANGUAGE OPTIONS)
§1
ORIGINAL
§2
OTHER
----
§3
SUBTITLE
Choose the subtitle
language.
AUTO
§4
ENGLISH (LANGUAGE OPTIONS)
§1
OTHER
----
§3
MENUS
Choose the
language for disc
menus.
ENGLISH
(LANGUAGE OPTIONS)
§1
OTHER
----
§3
RATINGS
Set a ratings level to
limit DVD-Video play.
Setting ratings (When level 8 is selected)
0 LOCK ALL: To prevent play of discs without ratings levels.
1 to 7: To prohibit play of DVD-Video with
corresponding ratings recorded on them.
8 NO LIMIT
When setting a ratings level, a password screen is shown.
Enter the password with [
34
] and [
1
], then press [ENTER].
Do not forget your password.
A message screen will be shown if a DVD-Video exceeding
the ratings level is inserted in the unit. Follow the on-screen
instructions.
PASSWORD
Change the
password for
“RATINGS”
(➜ above).
1 Select “CHANGE” and press [ENTER].
2 Enter the current password with [34] and [1], then press
[ENTER].
3 Enter the new password with [34] and [1], then press
[ENTER].
If “VERIFY” is displayed, please verify the password and
insert it again.
SETTING STATE Display the current setting of the items below
TV ASPECT
Choose the setting to suit
your television and
preference. (➜ page 7,
Selecting aspect ratio)
4:3PAN&SCAN 4:3LETTERBOX
4:3ZOOM 16:9NORMAL
16:9SHRINK 16:9ZOOM
TV TYPE
Select to suit the type of
television.
STANDARD CRT
LCD PROJECTION
PLASMA
NTSC DISC OUT
§5,6,7
Choose PAL60 or NTSC
output when playing NTSC
discs.
NTSC
:
Output signals from NTSC discs remain as
NTSC.
PAL60
:
NTSC disc can be viewed on PAL television.
[Asia]: “NTSC” is the factory preset.
STILL MODE
Specify the type of picture
shown when paused.
AUTO
FIELD
:
The picture is not blurred, but picture quality is lower.
FRAME: Overall quality is high, but the picture may
appear blurred.
VIDEO OUT-SCART
§
5
Choose the video signal format to
be output from the SCART and
COMPONENT VIDEO OUT
terminals (
➜
page 5)
VIDEO/YPbPr
S-VIDEO/YPbPr
RGB/NO OUTPUT
BLACK LEVEL
§8
Change the black level of
the picture if you connected
a television through the
COMPONENT VIDEO
OUT
terminals.
LIGHTER: When connected through VIDEO OUT or
S VIDEO OUT.
DARKER: When connected through COMPONENT
VIDEO OUT.
VIDEO OUT (I/P)
Select “PROGRESSIVE”
only if connecting to a
progressive output
compatible television.
INTERLACE
PROGRESSIVE
When you select “PROGRESSIVE”, a message screen
will appear.
≥For progressive output, press [3] and then press
[ENTER].
≥Press [RETURN] to cancel.
Changing the player settings
RQT8685-2B.fm Page 14 Tuesday, April 25, 2006 9:05 AM