Filter
Top Products
17
RQT8685
Progressive video
Sound incorrect
Recording
Unit displays
Television displays
§1
[Unit\with\PX\printed\on\the\outer\packaging]
§2
[Except[The\United\Kingdom]
§3
[The\United\Kingdom,\Australia\and]N.Z.]
There is ghosting
when progressive
output is on.
≥This problem is caused by the editing method or material
used on DVD-Video, but should be corrected if you use
interlace output. Change “VIDEO OUT (I/P)” in
“
VIDEO
”
tab
to “INTERLACE”. (14)
Pictures not in
progressive
output.
≥If the unit is connected to the television through VIDEO OUT
or S VIDEO OUT
§2
, output will be interlace.
Closed captions
not displayed.
§1
≥When progressive output is on, closed captions will not be
displayed.
Sound distorted. ≥Set Advanced Surround to “OFF”. (13)
≥Set Attenuator to “ON” if it causes distortion. (13)
Piercing noise
comes from the
speakers.
≥
If you have connected a digital amplifier which does not
include decoder, be sure to set “DOLBY DIGITAL”, “MPEG
§
3
to “PCM” and set “DTS” to “
OFF
” in “
AUDIO
” tab.
(
15
)
Effects do not
work.
≥None of the audio effects work when the unit is outputting
bitstream signals from the COAXIAL terminal. (6)
≥Some audio effects do not work or have less effect with
some discs.
Cannot record to
digital recording
equipment.
(Incorrect sound
recorded.)
≥You cannot record MP3.
≥You cannot record DVDs that have protection preventing
digital recording.
≥You cannot record DVDs if the recording equipment cannot
handle signals with a sampling frequency of 48 kHz.
≥Make the following settings:
– Advanced Surround: OFF (13)
– DOWN SAMPLING: ON (15)
– DOLBY DIGITAL/MPEG
§3
:
PCM
(15)
–
DTS
:OFF (15)
“noPLAy” ≥You inserted a disc the unit cannot play; insert one it can. (4)
≥You inserted a blank disc.
≥You inserted a disc that has not been finalized. (4)
“U11” ≥The disc may be dirty. (18)
≥You haven’t inserted the disc correctly: Insert it correctly. (8)
“H∑∑”
(∑∑
stands for a
number.)
≥Trouble may have occurred. The number following “H”
depends on the status of the unit. Turn the unit off and then
back to ON. Alternatively, turn the unit off, disconnect the AC
mains lead, and then reconnect it.
≥If the service numbers fail to clear, note the service number
and contact a qualified service person.
“nodISC” ≥You haven’t inserted a disc: Insert one.
≥
You haven’t inserted the disc correctly: Insert it correctly.
(8)
“/” ≥The operation is prohibited by the unit or disc.
“NODISC” ≥You haven’t inserted a disc: Insert one.
“THIS TYPE OF
DISC CANNOT BE
PLAYED. PLEASE
INSERT A
DIFFERENT
DISC.”
≥You inserted a disc the unit cannot play; insert one it can. (4)
≥You inserted a disc that has not been finalized. (4)
≥You inserted a blank disc.
“THIS DISC MAY
NOT BE PLAYED
IN YOUR
REGION.”
≥You can only play DVD-Video if their region number is the
same or includes the same region number as the unit or if
the DVD-Video is marked “ALL”. Confirm the region number
for the unit on the rear panel. (Cover)
Troubleshooting guide
RQT8685-2B.fm Page 17 Tuesday, April 25, 2006 9:05 AM