Filter
Top Products
8
RQT8509
Basic play
Standby/on switch (Í/I)
Press to switch the unit from on to standby mode or vice versa. In standby mode, the
unit is still consuming a small amount of power.
Standby/on indicator (Í)
When the unit is connected to the AC mains supply, this indicator lights up in standby
mode and goes out when the unit is turned on.
≥To play MP3, JPEG, MPEG4 or DivX video contents on DVD-RAM that contain both
[DVD-VR]
and another format (e.g.
[JPEG]
), select “Play as Data Disc” (➜ Page 17,
Other Menu).
≥Discs continue to rotate while menus are displayed. Press [∫] when you finish to
preserve the unit’s motor and your television screen.
≥Total title number may not be displayed properly on iR/iRW.
4
1
PauseStop
1Power ON.
2Open the disc tray.
3Load the disc.
4Start play.
Remote control sensor
≥
Load double-sided discs so the label for the side you want
to play is facing up.
≥
DVD-RAM
:
Remove discs from their cartridges before use.
Skip
≥
[DVD-VR]
Can also skip to the markers.
Stop
The position is memorized when “!” flashes on the display.
≥Press [1] (PLAY) to resume. (
Resume play
)
≥Press [∫] to clear the position.
≥Even after the unit is turned off, the position is memorized
(
Normal playback only
).
Search (during play)
Slow-motion (during pause)
≥Up to 5 steps
≥Press [1] (PLAY) to restart play.
≥
[VCD]
Slow-motion: forward direction only
≥[MPEG4] [DivX] Slow-motion: Does not work.
Pause
≥Press [1] (PLAY) to restart play.
Repeat play
≥Select “Repeat” (➜ page 12, Repeat play) or “A-B Repeat”
(➜ page 16, Play Menu).
If you are experiencing problems, refer to troubleshooting guide (➜ page 22, 23).
Basic play
RQT8509-B_0113.fm Page 8 Tuesday, January 17, 2006 4:18 PM