Filter
Top Products
RQTC0152
8 9
RQTC0152
RQTC0152
8 9
RQTC0152
Connection/The remote control/QUICK SETUP
COAXIAL IN
Amplifier with a built-in decoder or a
decoder-amplifier combination
Coaxial cable
Enjoying surround sound
Set “AUDIO OUT” to “OFF”
( page 19, “HDMI” menu), and change
“PCM OUTPUT”, “DOLBY DIGITAL” and
“DTS” (
page 19, “AUDIO” menu).
Connect the AC power supply cord last
Conserving power
This unit consumes a small amount of power, even when it is turned off (1 W). To save
power when the unit is not to be used for a long time, unplug it from the household AC
outlet.
Batteries
Insert so the poles (4 and 3) match those in the remote
control.
Do not use rechargeable type batteries.
Do not heat or expose to flame.
Do not leave the batteries in an automobile exposed to
direct sunlight for a long period of time with doors and
windows closed.
Do not:
mix old and new batteries.
use different types at the same time.
take apart or short circuit.
•
•
•
•
•
•
•
To household AC outlet
AC IN
R6/LR6, AA
attempt to recharge alkaline or manganese batteries.
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which
can damage items the fluid contacts and may cause a fire.
Remove batteries if the remote control is not going to be used
for a long period of time. Store in a cool, dark place.
Use
Aim at the remote control sensor ( page 10), avoiding
obstacles, at a maximum range of 7 m (23 feet) directly in front
of the unit.
•
•
You cannot use DTS Digital Surround
decoders incompatible with DVD.
•
AC power supply cord
(included)
1
Power on
Select
2 3
Follow the message and
make the settings.
4
Press to exit.
Register
Turn on the television and select the appropriate video input on the television.
To change these settings later, select “QUICK SETUP” (
page 19, “OTHERS” menu).
Shows QUICK
SETUP screen.
Back of the unit
OK
Press to finish
QUICK SETUP.
OK
5
STEP 1 Connection
STEP 2 The remote control
STEP 3 QUICK SETUP
RQTC0152-P(12.19).indd 9 2007-12-25 11:29:37