Filter
Top Products
RQT6627
16
Advanced operations
Using Graphical User Interface (GUI) screens
Play Menu
Display Menu
Unit information
A-B repeat [RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
(When the elapsed play time is displayed)
Repeat a section between points A and B within an item.
[ENTER] (start point) ➜ [ENTER] (finish point)
To cancel: [ENTER]
≥Subtitles recorded around A and B may fail to appear.
≥The end of an item becomes point B when it is reached.
≥A-B repeat is canceled when you press [QUICK REPLAY].
Repeat mode
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
(When the elapsed play time is displayed)
[JPEG]
[RAM]
PG: Program
A: All
S: Scene
§1
PL: Playlist
§1
OFF: Off
[DVD-A] [WMA] [MP3]
T: Track
G: Group
A: All
§2
OFF: Off
[DVD-V]
C: Chapter
T: Title
A: All
§2
OFF: Off
[VCD] [CD]
T: Track
A: All
OFF: Off
[JPEG]
G: Group
OFF: Off
§1
During play list play.
§2
During all group, program and random play.
If the Video CD has playback control
1. Press [∫] to clear “PBC” from the display.
2. Press the numbered buttons to select a track to start play.
3. Select an item to repeat.
To repeat only your favorite tracks/chapters
[DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
Start program play (➜ page 14) and display “A”.
Play mode display [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
---: Normal play PGM: Program play
RND: Random play ALL: All group play ([DVD-A])
Marker
[RAM] : 999 positions
[DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG] :5 positions
[ENTER] (The unit is now ready to accept markers.)
To mark a position: [ENTER] (at the desired point)
To mark another position:[2, 1] ➜ [ENTER]
To recall a marker: [2, 1] ➜ [ENTER]
To erase a marker: [2, 1] ➜ [CANCEL]
[RAM]
To mark the eleventh point and beyond
1. Press [2, 1] to select the marker pin icon.
2. Press [3, 4] to select “11–20”.
≥You can select the next group when the
current group is full.
3. Press [1].
≥The markers are ordered by time. This
means that the marker numbers can change when you add
and erase markers.
≥If places have been marked (e.g., with a DVD video
recorder), they are displayed.
≥You can clear existing markers, but they are restored when
you open the disc tray or switch the unit to standby.
≥This feature doesn’t work while using a play list.
[Note]
≥This feature doesn’t work during program and random play.
≥Markers you add clear when you open the disc tray or
switch the unit to standby.
1–10
4:3 Aspect
Select how to show images made for 4:3 aspect screens on
a 16:9 aspect television.
Normal: Laterally stretches images made for a 4:3 screen.
Auto: Expands suitable 4:3 letterbox images to fill more of
the screen. Other images appear in full in the
center of the screen.
Shrink: Images appear in the center of the screen.
Zoom: Expands all images to fill the screen.
If your television has a similar feature, use it instead for a
better effect.
Zoom (➜ page 13)
To select preset aspect ratio
Press [ENTER] and then [2, 1] to select. Press [ENTER] to
finish.
Subtitle Position/Subtitle Brightness (➜ page 12)
Bitrate Display on/off
[RAM] [DVD-A] (Moving picture part) [DVD-V] [VCD]
When you select “ON”:
During play: Shows the average bitrate (approximate
values) of the video being played
While paused:Shows the data volume of the frame and type
of picture (➜ page 21, Glossary—I/P/B)
While the display is on, press [2, 1] to change the display:
e [2, 1]
u
OSD Brightness (j3 to i3)
Adjust the brightness of the on-screen displays.
9.438 Mbps
Bitrate
Cur. 7.507 Mbps
Ave. 6.730 Mbps
5.0
Mbps
A record of bitrates for a
sampling period
Current bitrate
Average bitrate
RQT6627
17
Advanced operations
Audio Menu
Picture Menu
Picture Menu
∫ User mode
Press [1] while “U1”, “U2” or “U3” is highlighted and then press [3, 4] to
select “1”, “2” or “3”.
U1: MPEG D.N.R. (Digital Noise Reduction)
U2: Picture Control
U3: Video output mode➜left
Indicates how far you have played through an item.
Changing the time display [RAM] [DVD-A] [DVD-V] [VCD] [CD]
Press [3, 4] to show the elapsed play time or remaining time for the
program, play list, track or title (or chapter during program and random
play).
Elapsed play time [VCD] (SVCD only) [WMA] [MP3]
For display only, cannot be changed.
∫ Changing play speed [DVD-A] (Moving picture part) [DVD-V]
(Dolby Digital only)
You can slow down or speed up play.
Press [2] (slower) or [1] (faster).
There are five speeds:
a0.8 ,. a0.9 ,. a1.0 (normal speed) ,. a1.2 ,. a1.4
≥After you change the speed:
jOutput is in stereo,
jAdvanced Surround does not work,
jDigital output switches to PCM.
≥Sound is stereo as long as “a1.0” is orange.
To return to normal play
Press [1] (PLAY).
Unit information
Advanced Surround (➜ page 13)
Double Re-master (➜ page 13)
Dialogue Enhancer
[DVD-V] (Dolby Digital, DTS, 3-channel or over only, where the
dialogue is recorded in the center channel)
This makes the dialogue in movies
easier to hear.
ON()OFF (Factory preset)
≥This does not work or has less
effect with some discs.
Attenuator (For analog connection)
Switch on if sound is distorted.
ON()OFF (Factory preset)
Picture mode
N: Normal mode
S: Soft mode (Soft picture with fewer video artifacts)
F: Fine mode (Details are sharper)
C1 (Cinema1): Mellows images and enhances
detail in dark scenes
C2 (Cinema2): Sharpens images and
enhances detail in dark scenes
U1/U2/U3: User mode (➜ right)
Video output mode
480I: Interlace video
480P: Progressive video
(¢: Progressive output not possible with PAL signals)
≥You can change the video output mode only when
–“Progressive Out (Component)” is set to “Enable (NTSC
Disc Only)” and
– [For\the\United\Kingdom\and\Continental\Europe]
“Video Out (AV/Component)” is set to “Y PB PR”
in the SETUP menu (➜ page 18).
Transfer mode
Select the method of conversion for progressive output to
suit the type of material being played (➜ page 21,
Glossary—Film and video).
Auto 1 (normal): For viewing film material
Auto 2: For viewing film material (the same as Auto 1, but
able to convert 30-frame-per-second progressive
video)
Video: For video material
DVD
MPEGMPEG
4
PGMPGM
A B CD
SLEEPSLEEP
RNDRND A B
JPEGJPEG
ZOOMZOOMPG SD
AVAAV MPMP
3
G
R
CDCD WMWM
M
DVD
MPEGMPEG
4
PGMPGM
A B CDD
SLEEP
RNDRND A B
JPEGJPEG
ZOOMPG SD
AV AV MP
3
R
CDCD WM
M
Depth Enhancer (➜ page 13)
3D-NR (0 to i4)/Dot NR (On)
Reduces overall noise/Reduces the dot noise that occurs at
the borders between colors.
Block NR (0 to i3)
Smoothes block noise.
Mosquito NR (0 to i3)
Reduces the smudging that appears around contrasting
sections of the picture.
Contrast (j7 to i7)
Adjusts the contrast between light and dark parts of the
picture.
Brightness (0 to i15)
Adjusts the picture brightness.
Sharpness (j7 to i7)
Adjusts the sharpness of the edges of the horizontal lines.
Colour (j7 to i7)
Adjusts the shade of the picture’s color.
Gamma (0 to i5)
Adjusts the brightness of dark parts of the picture.
Progress indicator
e.g. [DVD-V]
Current position
Condition – play, pause, or slow/search