Filter
Top Products
7
Quick Start
Guide
Accessories/Optional Accessory
A
B
A
Preparation for Wall-hanging
Before mounting the TV on the wall, you must remove the TV-Stand from the TV.
Follow the steps below:
WARNING
Failure to use a Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the consumer.
Any damage resulting from not having a professional installer mount the unit will void your unit’s warranty.
Always be sure to ask a qualified technician to carry out set-up.
Incorrect fitting may cause equipment to fall, resulting in injury and product damage.
Do not mount this LCD Television directly below ceiling lights (such as spotlights, floodlights, or halogen lights)
which typically give off high heat. Doing so may warp or damage plastic cabinet parts.
A
Remove four screws
B
Pull out the TV-Stand
Foam mat or thick
soft cloth
Disconnect all the cables from the TV.
1
Remove the TV-Stand.
2
Antenna terminal Pin terminals HDMI terminal
greenbluered
green
Firmly tighten by hand.
Match colors of plugs and
terminals.
Insert firmly.
Insert firmly.
Reference of connection