Filter
Top Products
28
≥The tape length must be set correctly.
(See page 18.)
≥Tapes except T30, -60, -90, -120, -140, -160,
-180 tapes may not work correctly.
Selecting the Desired Tape
Speed
Press SPEED to make the selection in any of
steps 1–5 .
Programming a Timer
Recording of a TV Program Until
its End
(Auto SP/EP Change Function )
If, during a timer recording performed in the SP
mode, the VCR determines that the remaining
tape time is insufficient to record the program
to its end, the Auto SP/EP Change function
automatically changes the tape speed to EP to
ensure that the whole program will be recorded.
Depending on the remaining tape length,
recording may be performed in the EP mode
from the start. However, if the remaining tape
time is still not sufficient in this case, the
program cannot be recorded to the end.
Weekly Timer Recording
In step 2, select the desired day by pressing
DATE s.
For example, SU (Sunday)
CATEGORY
CHDATE ON OFF
SP––:–– ––:––
:
1
SU ––
CATEGORY
CHDATE ON OFF
SP––:–– ––:––
:
1
SU-SA ––
CATEGORY
ON OFF
SP––:–– ––:––
:
1
CHDATE
27TH A2
CHDATE ON OFF
EP2 20:02 21:3027TH
CATEGORY:
1
Video
Tape
Timer
Program-
ming
90 min.
90 min. Recording
by SP mode
1st Program
(90 min.)
2nd Program
15 min. Recording
by SP mode
30 min.
45 min.
Recording
by EP
mode
(60 min.)
3rd Program will
not be recorded.
Example for T120 tape:
On Screen Display
(SUuSunday, MOuMonday, TUuTuesday,
WEuWednesday, THuThursday, FRuFriday,
SAuSaturday)
Daily Timer Recording
For this timer function, several groups of days
can be selected.
A Daily recording from Monday to Friday
(MO–FR)
B Daily recording from Monday to Saturday
(MO–SA)
C Daily recording from Sunday to Saturday
(SU–SA)
In step 2, select the desired days by pressing
DATE s.
For example, C
Timer Recording from an
External Signal Source
If timer recording is performed by a unit
connected to the audio/video input sockets,
select the A1 or A2 indicator in step 3 for the
program position.
≥If DIRECT REC is set to
ON, A1 is skipped.
Setting other Programs in
Succession
Repeat steps 1–8.