Filter
Top Products
11
Setting Up
To Add and Delete the Channel
Preparations
≥ Confirm that the TV is on and the VCR viewing channel is
selected.
≥ Turn on the VCR and select any programme position
except A1 or A2.
Example:
If you want to add a new channel between Channel 4 and
Channel 6,
1 Press the MENU button V to
display the Main menu on the
TV screen.
2 Press the Cursor buttons (
3434
3434
34) T
to select “CH ADD&DELETE” then
press the ENTER button U.
3 Press the Cursor buttons (
3434
3434
34) T to select the desired
programme position (example CH3) then press the
Cursor button (
11
11
1) T to select “ADD”.
≥ Adding a channel shifts the programme positions of
Channel 6 to Channel 12 up, as shown in the list
above.
≥ The list of the programme positions do not appear on
the On Screen Display.
4 After adding, tune the added channel. (See steps 3–5 in
Manual Tuning on page 10.)
≥ Press the MENU button V twice and repeat steps 3–4
for each of the other programme positions.
5 Press the MENU button V four times to exit the On
Screen Display.
Example:
If you want to delete Channel 6,
1 Press the MENU button V to
display the Main menu on the
TV screen.
2 Press the Cursor buttons (
3434
3434
34) T
to select “CH ADD&DELETE” then
press the ENTER button U.
3 Press the Cursor buttons (
3434
3434
34) T to select the desired
programme position (example CH3) then press the
Cursor button (
22
22
2) T to select “DELETE”.
≥ Deleting a channel shifts the programme positions of
Channel 8 to Channel 12 down, as shown in the list
above.
≥ The list of the programme positions do not appear on
the On Screen Display.
≥ Repeat step 3 for each of the other programme
positions.
5 Press the MENU button V twice to exit the On Screen
Display.
END: MENU
CH ADD&DELETE
CH 3
ADD: DELETE:
CH SELECT:
END: MENU
CH ADD&DELETE
CH 3
ADD: DELETE:
CH SELECT:
END: MENU
CH ADD&DELETE
CH 3
ADD: DELETE:
CH SELECT:
END: MENU
CH ADD&DELETE
CH 3
ADD: DELETE:
CH SELECT:
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
SELECT
END
: ,ENTER
:MENU
MENU
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
SELECT
END
: ,ENTER
:MENU
MENU
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
SELECT
END
: ,ENTER
:MENU
MENU
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
SELECT
END
: ,ENTER
:MENU
MENU
12
24
36
48
510
612
7 –
8 –
Programme Channel
Position
12
24
3 –
46
58
610
712
8 –
Programme Channel
Position
12
24
36
48
510
612
7 –
8 –
Programme Channel
Position
12
24
38
410
512
6 –
7 –
8 –
Programme Channel
Position