28
RQT7070
Advanced Operations
29
RQT7070
Advanced Operations
Disc information
a PG: Program number [RAM]
PL: Playlist number [RAM]
T: Title number [DVD-V]
T: Track number [VCD] [CD]
G: Group number
[DVD-A] [WMA] [MP3] [JPEG]
b C: Chapter number [DVD-V]
T: Track number [DVD-A] [WMA] [MP3]
P: Picture number [JPEG]
c Time [RAM] [DVD-A] [DVD-V] [VCD] [CD]
≥Use [3, 4] to show the elapsed play time
or remaining time.
[DVD-A] [VCD] [CD]
[)Elapsed play time
l:;
l Remaining time for the track
l:;
{)Remaining time for the disc/group
[RAM] [DVD-A] [DVD-V]
≥Select a position to start play by specifying
a time with the numbered buttons and
press [ENTER].
Elapsed play time
[VCD] (SVCD only) [WMA] [MP3]
For display only, cannot be changed.
d Soundtrack language
(See [A] right for language abbreviations.)
Audio signal type
(See [B] right for details.)
Audio Mode (➡ page 26, Soundtracks)
Karaoke vocal on/off (Karaoke DVD only)
[DVD-V]
Solo: OFF or ON
Duet: OFF, V1iV2, V1 or V2
Current bitrate [WMA] [MP3]
Current sampling frequency [WMA] [MP3]
e Subtitle language
(See [A] right for language abbreviations.)
Subtitles on/off
[RAM] [DVD-A] [DVD-V] [VCD] (SVCD only)
ON()OFF
Track Information on/off
[WMA] [MP3] [CD] (CD text only)
ON()OFF
Picture information [JPEG]
Date()Full()OFF
^=======J
f Angle number (➡ page 26)
g Menu play [VCD]
Indicates whether menu play (playback
control) is on or off.
h Track/picture number in disc
Total number of tracks/pictures on disc
[WMA] [MP3] [JPEG]
i Still picture number [DVD-A]
Selected picture is shown during play.
j Slideshow setting [JPEG]
ON()OFF
Slideshow timing [JPEG]
0 sec–30 sec
g
d
128kbps
44.1kHz
12 18
ceh
d
i
Page
1
Slideshow
ON 5 sec
D
j
[A] Audio/Subtitle language
ENG: English POR: Portuguese
FRA: French RUS: Russian
DEU: German JPN: Japanese
ITA: Italian CHI: Chinese
ESP: Spanish KOR: Korean
NLD: Dutch MAL: Malay
SVE: Swedish VIE: Vietnamese
NOR: Norwegian THA: Thai
DAN: Danish ¢: Others
[B] Signal type/data
LPCM/PPCM/ÎDigital/DTS/MPEG:
Signal type
k (kHz): Sampling frequency
b (bit): Number of bits
ch (channel): Number of channels
e.g.: 3
/2 .1ch
.1: Low frequency effect
(not displayed if there is no
signal)
.0: No surround
.1: Mono surround
.2: Stereo surround (left/right)
.1: Center
.2: Front leftiFront right
.3: Front leftiFront right
iCenter
On-Screen Menu Icons contain information
about the disc or unit. These menus allow you
to perform operations by changing this
information.
Common procedures
1 Press [DISPLAY].
Each time you press the button:
Disc information > Progress indicator
(➡ page 29) (➡ right)
:;
Original display < Unit information
(➡ page 30)
[Unit\information\only]
While the leftmost icon is highlighted
2
Use [3, 4] to select the menu.
Each time you use the cursor jockey:
Play menu () Picture menu
ee
uu
Display menu () Audio menu
3
Use [2, 1] to select the item.
4 Use [3, 4] to select the
setting.
≥Items with “3” or “4” above and below
can be changed by [3, 4].
≥Press [ENTER] if the setting does not
change after using [3, 4].
≥Some items require different operations.
Read the explanations on the following
pages.
Using On-Screen Menu Icons
For your reference
≥Depending on the condition of the unit
(playing, stopped, etc.) and the type of
software, there are some items you cannot
select or change.
≥When numbers are displayed (e.g.title No.),
the numbered buttons (remote control) are
also effective for setting. After entering
numbers, press [ENTER] to register the
setting.
To clear the icons
Press [RETURN] until they clear.
∫ To change the position of the icons
1. Use [2, 1] to select the Bar position
icon.
2. Use [3, 4] to move the icons.
2. (There are 5 positions.)
Progress indicator
Indicates how far you have played through an
item.
e.g. [DVD-V]
a Current position
b Condition–play, pause, or slow/search
c Changing the time display
[RAM] [DVD-A] [DVD-V] [VCD] [CD]
≥Use [3, 4] to show the elapsed play time
or remaining time.
Elapsed play time
[VCD] (SVCD only) [WMA] [MP3]
For display only, cannot be changed.
Changing play speed
[DVD-A] (Moving picture part) [DVD-V]
(Dolby Digital only)
You can slow down or speed up play.
Use [2] (slower) or [1] (faster).
There are five speeds:
k
0.8
,.k
0.9
,.k
1.0 (normal speed)
,.k
1.2
,.k
1.4
≥After you change the speed:
≥–Multi-channel audio will be output in stereo.
≥–You cannot use Advanced Surround.
≥–Digital output switches to PCM.
≥–Sound is stereo as long as “k1.0” is orange.
To return to normal play
Press [1] (Play).
Í
3,4,2,1,
ENTER
RETURN
DISPLAY
1