Filter
Top Products
11
Basic operations
RQT6270
Selecting groups to play
[DVD-A]
The tracks on DVD-Audio are divided into groups. How these groups
are played differs with the disc so read the instructions that came
with the disc for further details.
1 Press [GROUP].
2 Press [ENTER].
3 Press the numbered buttons to select
the track number and press [ENTER].
The selected group and track begin to play.
Playing all the groups in succession (➡ page 12)
Playing bonus groups
Some discs contain bonus groups. To enjoy these groups you may
have to enter a password. Refer to the disc’s jacket.
1. Press [GROUP] to select the bonus group and press [ENTER].
2. Enter the 4-digit password with the numbered buttons and press
[ENTER].
≥If you enter the wrong password, you can erase a digit by press-
ing [CANCEL].
3. Press the numbered buttons to select a track and press [ENTER].
≥The bonus group can be played as many times as you like after the
password has been entered until the disc is removed from the unit.
Selecting still pictures—Page Skip
[DVD-A]
Remote control only
During play
Press [PAGE].
To enjoy even higher quality
sound—AUDIO ONLY
[DVD-A] [DVD-V] [VCD] [CD]
You can enjoy higher quality audio by stopping the video signal.
Press [AUDIO ONLY].
≥The AUDIO ONLY indicator on the main unit lights.
≥AUDIO ONLY is canceled if you press the button again or turn the
unit off. The light goes out.
Note
≥Video signals are output while the disc is stopped and when opera-
tions such as searching are performed. The television screen can
appear unusual while video signals are not being output.
≥The television may be distorted when video signals are turned on
and off when you turn AUDIO ONLY on and off, but this is not a
malfunction.
Using headphones
1 Set [PHONES] to “MIN” and connect
the headphones (not included).
Headphone plug type: 6.3 mm (
1
/4z) stereo
2 Adjust headphone volume with
[PHONES].
Note
Avoid listening for prolonged periods of time to prevent hearing damage.
Enjoying virtual surround effects
with 2 speakers or headphones
(ADVANCED SURROUND (V.S.S.))
[DVD-V] [VCD]
SP-V.S.S.: Dolby Digital, DTS, MPEG, Linear PCM, 2-channel or
over only
HP-V.S.S.: Dolby Digital, MPEG, Linear PCM, 2-channel or over
only
Use ADVANCED SURROUND (V.S.S.) (Virtual Surround Sound) to
enjoy a surround-like effect if you are using 2 front speakers or head-
phones.
If you are playing a disc with surround effects recorded on it, the
effect is broadened and sound seems to come from virtual speakers
on either side.
During play
Press [SP-V.S.S.] or [HP-V.S.S.].
Each time you press the button:
SP 1/HP 1: Natural effect
;
SP 2/HP 2: Emphasized effect
;
SP OFF/HP OFF: Cancel (Factory preset)
Note
≥Advanced Surround will not work, or will have less effect with some
discs, even if you select “1” or “2”.
≥Turn off the surround sound effects on the equipment you have
connected when using this effect.
≥Turn Advanced Surround off if it causes distortion.
≥
Output from this unit will be in stereo (two channels) when V.S.S. is on.
CINEMA
[DVD-A] [DVD-V] [VCD]
Remote control only
You can enjoy better pictures by changing the picture quality.
Press [CINEMA].
Each time you press the button:
C: Cinema mode: Mellows movies, enhances detail in dark scenes.
Indication on the unit’s display lights up.
:
;
N: Normal mode (Factory preset)
You can make finer adjustments to the picture if desired (➡ page 18,
Digital picture mode—User mode).
^-----------------}
T
1
G
1
The group number changes
each time you press the
button.
The page changes each time
you press the button.
e.g. Page 1
Optimum seating position
A
Speaker Speaker
3 to 4 times
distance A
OO
OO
OWhen using the
television’s speakers
NN
NN
N
Distance Al
Television’s width
Seating position
PAGE 1