Filter
Top Products
27
Playback procedure
6
Press OPEN/CLOSE or
PLAY.
The disc tray closes auto-
matically.
The TV-screen,
changes
to “
” and then playback
commences.
• A menu screen will
appear on the TV screen,
if the disc has a menu
feature.
1
Press DVD on the remote
control to select DVD
mode.
Press OPEN/CLOSE on
the unit or the remote con-
trol.
The disc tray will open.
2
Place a disc onto the tray.
Position it with the printed
label side up, align it with
the guides, and place it in
its proper position.
3
Press / or / to make a selection.
4
Press ENTER.
• Title is selected and play commences.
5
Press STOP to end playback.
• The unit memorizes the stopped point, depending on the
disc. “
” appears on the screen. Press PLAY to resume
playback (from the scene point).
• If you press STOP again or unload the disc (“
” appears
on the screen.), the unit will clear the stopped point.
7
Press OPEN/CLOSE.
The disc tray opens.
Remove the disc and press OPEN/CLOSE then press
POWER.
The disc tray closes and unit turns off.
NOTES:
• If a non-compatible disc is loaded, “In-
correct Disc”, “Region Code Error” or
“Parental Error” will appear on the TV
screen according to the type of loaded
disc. If these appear, check your disc
again (see pages 9 and 38).
• Some discs may take a minute or so to
start playback.
• When you set a single-faced disc label
downwards (ie. the wrong way up) and
press PLAY or OPEN/CLOSE on the
unit, “
” will appear on the display for
about 3 seconds and then “No Disc” or
“Incorrect Disc” will be displayed.
• Some playback operations of DVDs
may be intentionally fixed by software
producers. Since this unit plays DVDs
according to the disc contents the soft-
ware producers designed, some play-
back features may not be available. Also
refer to the instructions supplied with the
DVDs.
5E90501A P24-32 21/4/03, 11:57 PM27