Filter
Top Products
8 9
Quick Start Guide
First Time Setup
Identifying Controls
First time setup
Language
Auto program
Language
Language
English
First time setup
Language
Auto program
Auto program
ANT In
Mode
Start scan
All
Cable
Auto program
ANT In
Mode
Start scan
Cable
All
Now scanning analog channel ...
Progress
Edit
- - -
2
Favorite
Apply
No
Yes
Add
First Time Setup
“First time setup” is displayed only when the TV is turned on for the first time after the power cord is
inserted into a wall outlet.
Available only when “Auto power on” (p. 14-15) is set to “Off”.
Turn the TV On with the POWER
button
Select your language
Press to go to previous screen.
Or, select
icon, then press OK
for same results.
Auto channel setup
Select “Auto program”
Select antenna and input modes
Cable: Cable TV Antenna: Antenna
All : digital and analog
Analog : analog only (Reduces time for
scanning)
•
About broadcasting systems
Analog : traditional TV system
Digital : new system that allows you to view
more channels featuring high-quality
video and sound
Start scanning the channels
•
Available channels
(analog/digital)
are automatically
set.
•
If OK is not pressed after selecting “Apply”,
the channels will not be memorized.
Ŷ
Press to exit or return to previous screen
•
To change setting later, go to Menu screen (p. 14-15)
Note
next
select
select
next
English Español Français
Confirm registered channels
start
select
“Start
scan”
select
“Apply”
ok
set
select
ANT In
Mode
1
2
3
Identifying Controls
•
The TV consumes some power as long as the power cord is inserted into the wall outlet.
Note
Turns power On/Off
(used when the unit Power button is on)
Sets the remote to communicate with
other equipment (p. 20)
Volume
Menu navigations
Selects channels in sequence
Menu navigations
Displays Main Menu (p. 14-15)
Selects input mode (p. 12)
Displays or removes the channel banner
(p. 10)
Switches to previously viewed channel
and input mode.
Sleep timer (MINUTES)
(p. 10)
Changes aspect ratio (p. 11, 40)
Selects Audio Mode for TV Viewing
(p. 10)
Selects/OK/Change
RETURN (to previous menu)
Exit (from the menu)
Operates the Favorite channel list
function.
(p. 11)
GUIDE for DBS
Sound mute On/Off
Numeric keypad to select
any channel or press to enter
alphanumeric input in menus.
(p. 10)
Direct channel access for DTV and
DBS
(p. 10)
External equipment operations
(p. 12, 36) (VCRs, DVDs, etc.)
Receiver Location
How to use the LCD stand
Locate at a comfortable distance for viewing. Avoid placing where sunlight or other bright light (including reflections)
will fall on the screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or
moisture.
Adjust the stand to your desired angle.
The stand angle can be rotated 20 ° to the right / left.
Remote control sensor
Within about 23 feet (7 meters) in front of the TV set.
Power indicator
(on : red, off : no light)
Volume
Menu navigations
POWER button
Switches TV/VIDEO
Selects channels
in sequence
(NTSC)
(ATSC)