Filter
Top Products
35
Setup for Input Signals
Colour system / Panasonic Auto
Select Signal from the “Setup” menu during AV (S Video) input
signal mode.(“Signal [AV]” menu is displayed.)
Press to select the “Colour System” or “Panasonic
Auto”.
Mode
Colour system
Pansonic Auto
(4:3)
Press to select each functions.
Function
Set the colour system to match the input signal. If set to “Auto”, the colour system
is determined automatically.
Set to “4 : 3” to view 4:3 images in an unchanged format when Panasonic
Auto is selected. If you would like to view 4:3 images in “Just” format, set
to “Just”.
Auto PAL SECAM M.NTSC NTSC
3D Y/C Filter
(
NTSC
)
Colour system
Panasonic Auto
(
4:3
)
On
Auto
4 : 3
Signal
[
AV
]
Press
(Action) button
If the picture image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals the image may in
rare cases become unstable. Should this occur,
set the system to match the format of the input
signal.
MULTI DISPLAY Setup
Set up TIMER
Setup
Signal
Screensaver
Component/RGB-in select
RGB
OSD Language
English
(
UK
)