Filter
Top Products
7
Storing TV Broadcasts in Your VCR
The VCR is fitted with its own tuner (just like a normal TV) and
can be preset to receive up to 99 TV broadcast stations.
Pre-programmed TV Channels
(Australia only)
The local TV broadcast channels 2, 7, 9, 10 and 28 are
factory-preset in this VCR.
That is, if you can receive television broadcasts on VHF
channels 2, 7, 9, 10 and UHF channel 28, these are already
tuned on the programme positions with the matching
numbers. However, it is possible to cancel these settings and
tune the local TV broadcast channels to any desired
programme position.
Auto Tuning Using the On Screen Display
For New Zealand
When you use this VCR in New Zealand, need to operate as
follows:
Preparations
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR and select any programme position except
A1 or A2.
• Set [VCR/TV] switch (22) to [VCR].
Operations
1 Press [MENU] (7) to display
the Main menu on the TV
screen.
2 Press [Cursor] (37) (34) to
select [TUNER PRESET] then
press [OK] (23).
3 Press [Cursor] (37) (34) to
select [COUNTRY] then press
[Cursor] (37) (21) to select
[NEW ZEALAND].
4 Press [Cursor] (37) (34) to
select [AUTO TUNE] then press
[Cursor] (37) (21) to start the
Auto Tuning.
• When Auto Tuning is
completed, the On Screen
Display disappears and
programme position 1 is
selected.
Auto Tuning Using the On Screen Display
For Australia
Introduction
Auto Tuning using the On Screen Display should be
performed according to the following method if necessary.
Preparations
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR and select any programme position except
A1 or A2.
• Set [VCR/TV] switch (22) to [VCR].
Operations
1 Press [MENU] (7) to display
the Main menu on the TV
screen.
2 Press [Cursor] (37) (34) to
select [TUNER PRESET] then
press [OK] (23).
3 Confirm that [COUNTRY] is set
to [AUSTRALIA].
4 Press [Cursor] (37) (34) to
select [AUTO TUNE] then press
[Cursor] (37) (21) to start the
Auto Tuning.
• When Auto Tuning is
completed, the On Screen
Display disappears and
programme position 1 is
selected.
Channels that can be Received
Notes:
• Auto Tuning searches for TV stations from VHF minimum to
UHF maximum and memorizes every tuned programme
position. Other programme positions are skipped.
• Auto Tuning takes five or more minutes to complete its
search.
• If the VCR is not correctly tuned by Auto Tuning, follow the
procedure on page 8.
CH 1
CLEAR [OFF]
COUNTRY [AUSTRALIA]
AUTO TUNE
SEARCH [3]
FINE
END :MENU
SELECT:
TUNER PRESET
CH 1
CLEAR [OFF]
COUNTRY [NEW ZEALAND]
AUTO TUNE
SEARCH
[3]
FINE
END :MENU
SELECT:
TUNER PRESET
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
SELECT
END
: , OK
:MENU
MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
SELECT
END
: ,OK
:MENU
MENU
CH 1
CLEAR [OFF]
COUNTRY [NEW ZEALAND]
AUTO TUNE
SEARCH [3]
FINE
END :MENU
SELECT:
TUNER PRESET
CH 1
SEARCH
END: MENU
100
µ
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
The number displayed here
is the number of channels
still to be auto tuned.
VHF UHF CATV
Australia 0-12 28-69 45-470MHz
New Zealand 1-11 21-69 45-470MHz
The number displayed here
is the number of channels
still to be auto tuned.
MENU
SELECT
END
: , OK
:MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
CH 1
CLEAR
[OFF]
COUNTRY [AUSTRALIA]
AUTO TUNE
SEARCH [3]
FINE
END :MENU
SELECT:
TUNER PRESET
CH 1
SEARCH
END: MENU
100
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
MENU
SELECT
END
: , OK
:MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION