Filter
Top Products
8
Manual Tuning Procedure
1 Press [MENU] (7) to display the Main menu on the TV
screen.
2 Press [Cursor] (37) (34) to select [TUNER PRESET]
then press [OK] (23).
3 Press [Cursor] (37) (34) to select [CH] then select the
channel number you want to tune by pressing [Cursor]
(37) (21).
4 Confirm that [CLEAR] is set to [OFF].
5 Press [Cursor] (37) (34) to select [SEARCH] then
press [Cursor] (37) (21) to start the Manual Tuning.
• If the desired TV station has not been tuned, press
[Cursor] (37) (21) again.
• Press [MENU] (7) and repeat steps 3-5 for each
programme position you want to tune to a station.
6 Press [MENU] (7) three times to exit the On Screen
Display.
Direct Tuning
Follow steps 1 to 3 of Manual Tuning Procedure.
4 Confirm that [CLEAR] is set to [OFF].
5 Press [Cursor] (37) (34) select [SEARCH].
6 Press [Numeric] (2) to enter the number of the desired
programme position.
• For other channels that require tuning, repeat steps 3-6.
7 Press [MENU] (7) twice to exit the On Screen Display.
Fine Tuning Procedure
Follow steps 1 to 3 of Manual Tuning Procedure.
4 Press [Cursor] (37) (34) to select [FINE] then press
[Cursor] (37) (21) to obtain the best tuning condition.
• Press [OK] (23) to return the tuning to its former state.
5 Press [MENU] (7) to exit the On Screen Display.
Blanking of Unused Programme Positions
Follow steps 1 to 3 of Manual Tuning Procedure.
4 Press [Cursor] (37) (34) to select [CLEAR] then
press [Cursor] (37) (21) to select [ON].
• Repeat steps 3-4 for other unused programme positions
to skip during the selection of programme positions.
• To cancel the blanking of a programme position select
that programme position then set [CLEAR] to [OFF].
5 Press [MENU] (7) twice to exit the On Screen Display.
Setting the Clock of Your VCR
In the event of a power failure, the clock will operate on its
back up system for a minimum of 3 years. After 3 years, clock
back up in the event of a power failure can only be
guaranteed for maximum of 1 hour.
Preparations
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR.
•Example:
Date; 16 October, 2005
Time; 20:15
Operations
1 Press [MENU] (7) to display
the Main menu on the TV
screen.
2 Press [Cursor] (37) (34) to
select [CLOCK SET] then press
[OK] (23).
3 Set each item by pressing
[Cursor] (37) (341). Press
[Cursor] (37) (2) to return to
the previous item.
At the set time (H:M) point:
• When it is kept pressed, the
indication changes in 30 minute
steps.
• There is no need to press
[Cursor] (37) (1).
4 Press [MENU] (7).
• The clock starts.
Time Reset Function
If the clock is less than two minutes slow or fast, it can easily
be reset to the proper time.
Example:
Resetting the clock to 12:00.00
1 Press [MENU] (7) to display the Main menu on the TV
screen.
2 Press [Cursor] (37) (34) to select [CLOCK SET] then
press [OK] (23).
3 When the current clock displays on the VCR is
between 11:58.00 and 12:01.59, press [MENU] (7) as
soon as you hear the 12:00.00 signal. This resets the
time to 12:00.00.
CH 2
END: MENU
CH 2 SEARCH 74
END: MENU
SEARCH
CH 2 AFC: OK
FINE : END: MENU
M
1
Y
2005
D
1
H:M
0:00
CLOCK SET
START:MENU
SELECT:
MENU
SELECT
END
: , OK
:MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
MENU
SELECT
END
: , OK
:MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION