Filter
Top Products
32
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Universal Remote Control is...
The Remote Control may be set up to control some basic
DSS or Cable box functions.
The Universal Remote Control Setup
1
Press , FM, DVD or DSS CABLE on the remote
control to select the desired mode. (See below for buttons
available in each mode.)
Once the remote control has been properly set up, you can
select TV-VCR, FM, DVD, DSS or CABLE mode depending
on which functions you wish to control.
Find your DSS box or Cable box Brand Code
Number from one of the charts on the next
page.
3
Confi rm code entry. Press POWER* to turn
selected unit ON or OFF.
• See below for controllable functions in each mode.
• Please repeat the Universal Remote Control Setup after
replacing remote control batteries.
• The remote control will not operate all DSS receivers or Cable
Boxes made by the manufacturers listed. If you get no results,
your particular brand cannot be controlled.
2
Set up remote. Hold down DSS CABLE and
press NUMBER keys to enter code.
• If code number is 100 or greater, e.g., press 1 - 0 - 2 for
102.
Using the Universal Remote Control
(Available Buttons / Functions)
Set to , FM, DVD:
Cable Box Universal Remote Control Feature
Set to DSS CABLE:
• Basic VCR functions, e.g. PLAY, REC, etc.
• CABLE/DSS function, e.g. POWER, ENTER, NUMBER keys
(except 100 key), CH UP/DOWN.
All TV functions, as well as functions of TV-VCR, FM, or
DVD.
S
U
R
R
O
U
N
D
ENTER
POWER
TV-VCR
DVD
DSS CABLE
FM
NUMBER
keys
Notes