Panasonic PV-DF2703 TV DVD Combo User Manual


 
65
For Your Information
If you cannot resolve the problem, please call the Customer Satisfaction Center for product
assistance at 1-800-211-PANA(7262).
To locate an authorized servicenter call toll free 1-800-211-PANA(7262)
or send e-mail to : consumerproducts@panasonic.com.
DVD/Video CD/CD
Correction
Play fails to start even
when PLAY is pressed...
This unit cannot play discs other than DVDs, Video CDs and CDs.
The disc may be dirty and require cleaning.
Play starts but then
stops
immediately...
Be sure disc is installed with label side up.
Picture is distorted
during rapid advance or
rapid reverse...
The picture will be somewhat distorted at times: this is normal.
No Forward/Reverse
search play...
Some discs may have sections which prohibit Forward/Reverse search. (P. 21)
Play does not start even
when title is selected...
• Confi rm the “DVD LOCK” setting. (P. 59)
Audio soundtrack and/or
subtitle language is not
the one selected at the
initial settings...
If the audio soundtrack and/or subtitle language selected at DVD initial settings
does not exist on the disc, it will not be accessible.
No subtitles...
Subtitles appear only when available on disc.
Select “ON” at the “Subtitle language” section (P. 48) to display subtitles.
Alternative audio
soundtrack
(or subtitle) language
cannot be selected...
Alternative language cannot be selected with discs which do not contain more than
one language.
For some discs, alternative language cannot be selected with the AUDIO or SUB
TITLE button. Try selecting it from the DVD MAIN MENU if available.
Angle cannot be
changed...
This function is dependent on software availability. Even if disc has multiple angles,
they may be recorded for specifi c scenes only (ANGLE Indicator on unit lights up). (P.
49)
Miscellaneous Correction
Video cassette cannot
be inserted...
Insert the cassette window side up; record tab facing you.
Video cassette cannot
be removed...
Completely insert Power Plug into an AC outlet.
Eject does not function
or insertion cannot be
done...
Turn the POWER off and then on, and try ejecting or inserting the tape again.
Video cassette ejects
when a recording is
started, or the power is
turned off for timer
recording...
Make sure cassette record tab is intact. (P. 4)
The disc cannot be
removed...
First, unplug unit. Then, prepare a rigid wire (e.g. an extended paper clip, etc.) and,
applying moderate force, insert it straight into the hole at the base of the tray. The
tray will eject a little. Now, pull the tray all the way out and remove the disc. (P. 10)
In Stop mode, the VCR
motor (CYLINDER)
continues to rotate..
To enable Quick Play mechanism, the VCR cylinder will rotate for about 3 minutes.
This reduces response time from Stop to Play mode and from Play to Rewind Search
mode.