Filter
Top Products
VQT4J81
40
40
Playback is possible from the time-specified
position.
• Put the unit into the stopped state or playback state.
1
Press [MENU].
(When playback is in progress, go to step
3
.)
2
Press +, – to select “PLAY MENU” and
press [q OK] to enter.
3
Press +, – to select “TIME SEARCH” and
press [q OK] to enter.
4
Set the playback start
position.
(Change the value for “TIME” to
set the start position.)
Press u, i to select “00:00:00” (hour:minute:
second) and press +, – to change the values.
5
Press [q OK].
Playback starts from the specified position.
Press [F2 (CLOSE)] to stop the setting
process midway.
* Time search playback applies only to the currently
selected file.
Playback from a specifi ed
position (TIME SEARCH)
Slight return playback
This function returns a short amount of time
during playback to enable you to listen again. It is
a useful function for language learning, or if you
miss hearing something.
1
Press [q OK] during playback.
Each time the button is pressed, playback rewinds by
approx. 3 seconds (factory setting).
Setting the return time:
• Put the unit into the stopped state or playback state.
1
Press [MENU].
(When playback is in progress, go to step
3
.)
2
Press +, – to select “PLAY MENU” and
press [q OK] to enter.
3
Press +, – to select “SLIGHT RETURN” and
press [q OK] to enter.
4
Press +, – to select the
number of seconds (1 to 5)
and press [q OK] to enter.
(The factory setting is “3 sec”.)
To exit the setting screen, press [F2 (CLOSE)].