Panasonic SC-VK82D DVD Player User Manual


 
QUICK SETUP/Setting the time/DEMO function
9
RQT8169
The QUICK SETUP screen assists you to make necessary
settings.
Turn on the television and select the appropriate video input on
the television.
1 Press [
::
::
:, DVD/CD] to select “DVD/CD” as the
source.
The unit comes on.
Press [
LL
LL
L] when a disc is in the tray.
2 Press [SHIFT] + [SETUP] to show the QUICK
SETUP screen.
3 Follow the messages and press [
88
88
8,
99
99
9,
; ;
; ;
;,
::
::
:] to
select, then press [ENTER] to make the settings.
Press [RETURN] to go back to the previous screen.
4 Press [ENTER] and then [SHIFT] + [SETUP] to end
the settings.
C
LO
C
K/
TIMER
,
,
,
S
HIF
T
,
DVD/C
D
RET
U
RN
S
ETU
P
,
,
,
,
This is a 24-hour clock.
1 Press [CLOCK/TIMER] to select CLOCK.
Every time you press the button:
CLOCK
Previous display
RECPLAY
2 (within 7 seconds or so)
Press [
gg
gg
g, REW/
44
44
4] or [
ff
ff
f,
33
33
3/FF] to set the time.
3 Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you
set the time.
To display the time
Press [CLOCK/TIMER] once when the unit is on or at standby
mode.
The time is shown for about 5 seconds.
Note
Reset the clock regularly to maintain accuracy.
Setting the time
STEP7
QUICK SETUP
STEP6
When the unit is first plugged in, a demonstration of its functions
may be shown on the display.
If the demo setting is off, you can show a demonstration by
turning on the demo.
Press and hold [DISPLAY DEMO].
The display changes each time the button is held down.
DEMO OFF (off) DEMO ON (on)
You can reduce the power consumed in standby mode by
turning the demonstration off.
DEMO function
DEMO
DI
S
PLA
Y
RQT8169(08_09)new1 4/20/05, 11:28 AM9