Filter
Top Products
10
SYSTEM INFORMATION
Please note that the following functions were added to
improve the operation of the combination cameras.
■ Additions
● Selection of Pan/Tilt Speed
The Pan/Tilt speed can be changed by selecting a mode in
the menu (A1) displayed on the LCD display of the con-
troller.
1. Select the desired monitor and camera.
2. Select a mode by pressing the F3 or F4 button.
“❑” indicates the currently selected mode.
SLW: Moves the Pan/Tilt Head at lower speed.
FST: Moves the Pan/Tilt Head at higher speed.
3. Move the Joystick to move the Pan/Tilt Head in the
desired direction.
Note: Changing the Pan/Tilt speed by pressing the
STOP/SLOW button is enabled only when FST
mode is selected.
The above function is available in a system that includes
the following equipment:
WJ-SX550 Series Matrix Switcher
CPU Ver. 6.00 or later
Control Ver. 6.00 or later
WV-PB5548 Data Board Ver. 6.00 or later
■ Version Information
● WJ-SX550 Series Matrix Switcher
The onscreen display indicates the version in “Cold Start”
or “Normal Start” during the power up procedure.
Note: x.xx is a version number.
Camera cc A1
Monitor mm SLW
FST
F3 F4F2F1
Matrix Switcher
ROM
CPU
Ver.
Control
Alarm
X.XX
X.XX
X.XX
X.XX
X.XX
No.1
Output
RS-485
No.1
No.1
CPU
Unit
Position
01
Video
Character
VD/VS
Model WJ-SX550C
Type
Board SW.
No.
NTSC
1
VS
"Normal Start"