Filter
Top Products
6
7
Accessories
Assembly screws
A
(for 58”)
XYN5+F25FN
M5 × 25 (Silver) (4)
(for 65”)
THEL074
M5 × 30 (Silver) (6)
B
(for 58”)
THEL073N
M5 × 30 (Black) (4)
(for 65”)
XYN6+F25FJK
M6 × 25 (Black) (4)
Poles (2)
(for 58”)
L
R
L
or
R
is printed at the
bottom of the poles.
(for 65”)
Front
Back
Base (1)
(for 58”)
(for 65”)
Allen wrench
(included tool only for 65”)
C
Accessories/Optional Accessory
Accessories
Remote Control
Transmitter
N2QAYB000485
Batteries for the
Remote Control
Transmitter (2)
AA Battery
AC cord
Product Registration Card (U.S.A.)
Operating Instructions (Book)
VIERA Concierge and Quick start guide
Installing the remote’s batteries
Open
Hook
Note the correct polarity
(+ or -).
Close
Caution
Incorrect installation may cause
battery leakage and corrosion,
resulting in damage to the remote
control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such
as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd)
batteries.
Do not burn or break batteries.
Optional Accessory
Please contact your nearest Panasonic dealer to purchase the
recommended wall-hanging bracket. For additional details, please
refer to the wall-hanging bracket installation manual.
Wall-hanging bracket
(angle)
TY-WK5P1RW (for 58”)
a: 19.7” (500 mm)
b: 11.8” (300 mm)
TY-WK6P1RW (for 65”)
a: 26.9” (684 mm)
b: 11.8” (300 mm)
Rear of the TV
Holes for wall-hanging
bracket installation
Screw for fixing the TV onto the wall-hanging bracket
(not supplied with the TV)
Depth of screw:
minimum 0.59” (15.0 mm) (58”)
0.55” (14.0 mm) (65”)
maximum 1.18” (30.0 mm)
(View from the side)
a
b
M8
Warning
In order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a licenced
contractor to secure the wall-hanging brackets.
Carefully read the instructions accompanying optional accessories, and be absolutely sure to take steps to prevent
the TV from tipping over.
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.
Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the
wall before hanging bracket.
When using the angled-type wall hanging bracket, please ensure that there is sufficient space for the connecting
cables not to press against the wall when the TV is tilted forward.
For safety reasons, remove units no longer being used from their wall-mounted locations.
Accessories
Check you have all the items shown.
M8
Operating Instructions (CD-ROM)
Attaching the pedestal to TV
■
Assembling the pedestal
[TC-58PS24 (TBLX0157)] [TC-65PS24 (TBLX0195)]
Fix securely with assembly screws
A
.
(Total 4 screws)
Tighten screws firmly.
Fix securely with assembly screws
A
.
(Total 6 screws)
Tighten screws firmly using Allen wrench
C
A
L
R
Pole
Front
Pole
Base
A
C
Pole
Front
Pole
Base
■
Set-up
Carry out work on a horizontal and level surface.
Tighten screws firmly.
(Image: TC-65PS24)
B
Fix securely with assembly
screws
B
. (Total 4 screws)
Rear side
Arrow
mark
Pole
Hole for pedestal
installation
Pole
Base
Bottom view
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result.
Contact your nearest Panasonic Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly,
the pedestal will not be strong enough to support the TV, and it might fall over and
become damaged, and personal injury may result.
Pedestal
TBLX0157 (TC-58PS24)
TBLX0195 (TC-65PS24)
How to assemble (p. 7)