Filter
Top Products
Getting started
13
First Time Setup
Getting started
Press to go back to the
previous screen
z
About broadcasting systems
Analog (NTSC):
Conventional broadcasting
Digital (ATSC):
New programming that
allows you to view more
channels featuring high-
quality video and sound
Auto channel setup ( ANT/Cable setup)
Select the connected Antenna in terminal
ANT/Cable setup
Step 3 of 6
Cable Antenna Not used
ANTENNA
Cable In
ANTENNA
Cable In
OK
RETURN
Select
select
OK
Not used: Go to
(Label inputs)
Select “Not used” when no wire is connected to the “Antenna/Cable” terminal.
z
Typical when a Cable/Satellite box is connected to a TV AV input.
z
Prevents accidental tuning to an unavailable signal, when Cable or Satellite
box is used.
Select “Start”
Auto program
Step 4 of 6
Start Skip
OK
RETURN
Select
select
OK
Skip: Go to
(Label inputs)
Start scanning the channels
(Available channels are automatically set.)
Auto program
Progress
Number of analog channels
Number of digital channels
Press RETURN to quit
8%
10
0
RETURN
This process may take up to 20 minutes.
z
This step is not needed when a Cable or
Satellite box is connected to an AV input.
Select “Start”
Completion message is displayed when the Auto program scan is successfully
completed.
Auto program
Auto program completed.
Press OK to continue.
Number of analog channels
Number of digital channels
10
0
OK
RETURN
OK
If there is no available
channel, return to
-
(ANT/ Cable setup).
“Not used” will be
selected.
Operation of the EXIT button during “First time setup”
Press the button once to display confirmation screen. Press again to close
confirmation screen.
[EXIT confirmation screen]
Are you sure you want to exit the First Time Setup?
Yes
No
OK
RETURNSelect
Yes Exit “First time setup”
No
Return to the original screen.