Filter
Top Products
32
Setup
Other function settings
Settings Items Item Description
Channel surf
mode
All/Favorite/
Digital only/
Analog only
Sets the mode to select the channel with the Channel up/down button.
Favorite: Only channels registered as FAVORITE. (p. 17)
Language English/
Español/
Français
Selects the screen menu language.
Clock
Adjusts the clock. (p. 14)
ANT/Cable setup See p. 26-27 for more detail.
Input labels
(Display labels
of connected
devices)
Selects the terminal and label of the external equipment.
Devices connected to external input terminals can be labeled for easier identification during
the input selection. (Input select (p. 18))
Terminals: HDMI 1/HDMI 2/Component/Video/PC
Label: [BLANK] Not used/Blu-ray/DVD/DVD REC/HOME THTR/GAME/COMPUTER/
VCR/ CABLE/SATELLITE/DVR/CAMERA/MONITOR/AUX/RECEIVER/MEDIA CTR/
MEDIA EXT/OTHER
•
You can also enter the label name directly. (Entering characters (p. 16))
HDMI control See p. 24 for more detail.
Eco/Energy
saving
Power save
(Standard/
Saving)
Reduces screen brightness to lower power consumption. Eye-friendly for
viewing in a dark room.
No signal for
10 minutes
(Stay on/
Power TV
off)
To conserve energy, the TV automatically turns off when NO SIGNAL and
NO OPERATION continue for more than 10 minutes.
• Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set.
• “No signal for 10 minutes was activated” will be displayed for about 10
seconds when the TV is turned on for the first time after the power was
turned off by “No signal for 10 minutes”.
• The on-screen display will flash 3, 2 and 1 to indicate the last three (3)
remaining minutes prior to the shut-off.
No activity
for 3 hours
(Stay on/
Power TV
off)
To conserve energy, the TV automatically turns off when no operation of
remote and side panel key continues for more than 3 hours.
• Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set,
or while “PC input” is selected.
• No activity for 3 hours was activated” will be displayed for about 10
seconds when the TV is turned on for the first time after the power was
turned off by “No activity for 3 hours”.
• The on-screen display will flash 3, 2 and 1 to indicate the last three (3)
remaining minutes prior to the shut-off.
Advanced
setup
Auto power
on(No/Yes)
Turns TV On automatically when the cable box or connected device is
turned On. TV AC cord must be plugged into this device. TV turns on every
time the power is restored.
Image viewer
auto play
(Off/On)
Displays the confirming message or not if the USB stick is inserted into the
TV.
First time setup
Restarts the first time setup from “Language” setting. (p. 12)
About
Displays TV version and software license.
Reset to
defaults
Performing Reset will clear all settings made with Setup, such as channel
settings.
• Password setting/entering (p. 16)