Panasonic TH-50PZ700A Flat Panel Television User Manual


 
Advanced
Menu
Item Adjustments / Con gurations (alternatives)
Setup
DVB Favourites Edit
Creates list of favourite programmes (p. 23)
Tuning Menu
Auto Tuning
Automatically sets the channels received in the area (p. 24)
Analogue
Programme Edit
Edits analogue channels (p. 25)
DVB Manual
Tuning
Sets the DVB channels manually (p. 25)
Analogue
Manual Tuning
Sets the analogue channels manually (p. 25)
Add New DVB
Services
Adds new DVB services (p. 25)
New Service
Message
Selects whether to give a noti cation message when a new DVB service is found (p. 25)
DVB Signal
Display
Checks the DVB signal condition (p. 25)
Off Timer
Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Teletext
Teletext display mode (TOP (FASTEXT) / List) (p. 16)
Shipping Condition
Resets all settings, for example, when moving house (p. 26)
System Update
Downloads new software to TV (p. 23)
Power Save
Reduces brightness of picture to economise on power consumption (Off / On)
Side Panel
Increases the brightness of the side panel (Off / Low / Mid / High)
The recommended setting is “High” to prevent panel “image retention”
Picture Overscan
Selects the screen area displaying the image (Off / On)
On : Enlarged the image to hide the edge of the image.
Off : Displayed the image in the original size.
Set to “On” if noise is generated on the edge of the screen.
This function is available when aspect is set to 16:9.
1080i or 1080p signal only
Input Labels
Labels or skips each input terminals (p. 27)
Banner Display
Timeout
Sets how long the information banner (p. 11) stays on screen
0 (No display) to 10 sec. in 1-sec. increments
VIERA Link Settings
VIERA Link
Sets to use VIERA Link functions (Off / On) (p. 32)
Power off Link
Set to “Set” to use Power off Link function (No / Set) (p. 33)
Power on Link
Set to “Set” to use Power on Link function (No / Set) (p. 33)
SD Card LED
Lights blue LED while SD Card is inserted (Off / On) (p. 31)
Region Select
Selects the region where you live to adjust the standard time (NSW/ACT / Victoria /
Queensland / South Australia / Western Australia / Northern Territory / Tasmania)
(p. 23)
Daylight Saving Time
Select time offset from the standard time for Summer Time
(Auto / Off / +1/2 Hr / +1 Hr) (p. 23)
Set to “Auto” normally
Refresh Rate
Changes the image processing of the panel (depending on the input signal) (50Hz / 100Hz)
Set to “100Hz” normally
Software Licence
Displays the software licence information
System Information
Displays the system information of this TV
21
How to Use Menu Functions
(picture, sound quality, etc.)
Menu list
A different menu will be displayed while PC, DVI to HDMI adapter cable or SD Card is used. (p. 28-29 and p. 31)
Only available items can be selected.