Filter
Top Products
12
OPTION
SD CARD
INPUT
EXIT
RETURN
TV
POWER
Auto Tuning - Digital (DVB) and Analogue
This will take about 6 minutes.
2
RF Ch Service Name Type Quality
ABC TV Sydney DVB 10
3 SBS DIGITAL 1 DVB 10
4 FTV guide DVB 10
7 7 Digital DVB 10
CH 29 Analogue
-
CH 33
DVB: 4 Analogue: 2
Searching
Analogue
-
Digital (DVB) Tuning 6 69
Analogue Tuning 0 75
Select State / Territory
Northern Territory
Queensland
Victoria
New South Wales / Australian Capital Territory
Tasmania
South Australia
Western Australia
Please select your viewing environment.
Home Shop
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
1
Auto Tuning
Auto Tuning is now complete and your TV is ready for viewing.
•
You can now use the remote
control to turn On the TV or turn
the TV to standby mode.
(Power LED: On)
•
To edit programmes
“Editing Programmes” (p. 28)
3
Start Auto Tuning
•
Auto Tuning will start to search for
TV programmes and store them in
the numbered order as specifi ed
by the broadcasters.
2
Select your state
select
•
“Home” is the recommended
mode for viewing at home. Select
“Home” for optimal picture / power
consumption. “Shop” is for in-store
display.
•
If “Shop” is selected, the word
“Shop” appears every time the TV is
switched on. (p. 14)
Home: “Viewing Mode” is set as
“Normal”. (p. 24)
Shop: “Viewing Mode” is set as
“Dynamic”. (p. 24)
4
Select the picture setting
select
set
Search and store TV programmes automatically.
These steps are not necessary if the setup has been completed by your local dealer.