Filter
Top Products
29
PICTURE Adjustments
ADVANCED SETTINGS
Notes:
• “COLOR” and “TINT” settings cannot be
adjusted for “RGB/PC” input signal.
•
You can change the level of each function
(PICTURE, BRIGHTNESS, COLOR, TINT,
SHARPNESS) for each PICTURE MENU.
•
The setting details for STANDARD, DYNAMIC
and CINEMA respectively are memorized
separately for each input terminal.
•
The “TINT” setting can be adjusted for NTSC signal
only during “VIDEO (S VIDEO)” input signal.
•
In PICTURE, there is not a noticeable change
even when contrast is increased with a bright
picture or reduced with a dark picture.
On the remote control unit, while the “ADVANCED SETTINGS” menu is displayed, if either the N button is pressed at any time
or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
Helpful Hint ( /
NORMALIZE
Normalization)
Item Effect Adjustments
PICTURE
Less More
Adjusts the proper picture contrast.
BRIGHTNESS
Darker Brighter
Adjusts for easier viewing of dark pictures
such as night scenes and black hair.
COLOR
Less More
Adjusts color saturation.
TINT
Reddish Greenish
Adjusts for natural fl esh tones.
SHARPNESS
Less More
Adjusts picture sharpness.
Item Effect Details
BLACK
EXTENSION
Less More
Adjusts the dark shades of the image in gradation.
INPUT
LEVEL
Less More
Adjustment of parts which are extremely bright and hard to see.
GAMMA
Down Up
S+ CURVE*
1
S CURVE 2.0 2.2 2.5 2.6*
2
*1 When “PICTURE MENU” is set to “DYNAMIC”, GAMMA “S+ CURVE” can be
selected. When 2k1k signals are received with the Dual Link HD-SDI Terminal
Board (TY-FB11DHD), “S+ CURVE” cannot be selected.
*2 When 2k1k signals are received with the Dual Link HD-SDI Terminal Board (TY-
FB11DHD), GAMMA “2.6” can also be selected.
AGC
OFF ON
Increases the brightness of dark signal automatically.
W/B HIGH R
Less More
Adjusts the white balance for light red areas.
W/B HIGH G
Less More
Adjusts the white balance for light green areas.
W/B HIGH B
Less More
Adjusts the white balance for light blue areas.
W/B LOW R
Less More
Adjusts the white balance for dark red areas.
W/B LOW G
Less More
Adjusts the white balance for dark green areas.
W/B LOW B
Less More
Adjusts the white balance for dark blue areas.
Notes:
• Carry out “W/B” adjustment as follows.
1.
Adjust the white balance of the bright sections using the “W/B HIGH R” , “W/B HIGH G” and “W/B HIGH B” settings.
2. Adjust the white balance of the dark sections using the “W/B LOW R” , “W/B LOW G” and “W/B LOW B” settings.
3. Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.
• The adjustment values are memorized separately for each input terminal.
• The adjustment range values should be used as an adjustment reference.