Filter
Top Products
Viewing 3D images
28
Attaching Ferrite Core (supplied: TH-P42VT30Q, TH-P50VT30Q)
Be sure to attach the provided ferrite core to the charging cable to reduce interference or electrical
noise.
1 Attach the ferrite core as close to USB
connector of the charging cable as shown.
Mini USB connector
USB connector
2 Close the ferrite core until it clicks.
USB connector
Charging the 3D Eyewear (rechargeable type)
To charge when the TV is in the Standby mode
POWER
INPUT
TV AV
SD CARD
ASPECT
EXIT
INFO
OPTION
STTLTEXT
R G Y B
CH
POWER
REC
RETURN
jk l
ghi
mno
tuvpqrs
wxyz
abc def
MUTE
LAST VIEW
CHVOL
INDEX HOLD
TV
MENU
1. Display the menu
MENU
“How to Use the Menu Functions” (p. 34)
2. Select [Setup]
3. Select [Other Settings]
2/2
System Menu
Other Settings
Access
access
select
4. Select [USB Charge in Standby] and set [On]
USB Charge in Standby
Off
Power Save
Other Settings
On
access
select
[USB Charge
in Standby]
store
select
[On]
5. Turn off the television power, and set
the 3D Eyewear power switch to “OFF”
6. Connect as shown
USB connector
Mini USB connector
Ferrite core
(
supplied: TH-P42VT30Q,
TH-P50VT30Q
)
•
The indicator lamp
lights red, and
charging starts.
•
When the
indicator lamp
turns off, charging
is complete.
(Approximately 2
hours required)
7. Remove the charging cable
To charge when the TV is on
1. Turn off the television power, and set the 3D Eyewear power switch to “OFF”
2. Connect as shown above, and turn on the television power
•
The indicator lamp of the 3D Eyewear lights red, and charging starts.
•
When the indicator lamp turns off, charging is complete. (Approximately 2 hours required)
3. Turn off the television power, and remove the charging cable