Panasonic TH-P50VT30V TV Antenna User Manual


 
Tuning and Editing Channels
44
[Channel List Edit] - Skip unwanted channels / Edit Channels (Change name, Move)
You can hide unwanted channels. The hidden channels cannot be displayed except in this function.
Use this function to skip unwanted channels.
Select a channel and reveal / hide
1 BBC1
2 *****
3 *****
4 *****
5 *****
6 *****
7 *****
Channel List Editor
[reveal] / [hide]
: [reveal]
: [hide] (skip)
select
To reveal all channels
Y
To retune each channel (Manual Tuning)
R
(see below)
To edit channels
You can also edit each channel in the Channel List.
Select a channel to edit and:
TV
1 BBC
CH02
5.5MHz
PAL
16:9
Channel name
Channel position
To move the channel position
G
Select the new position
Store
G
To rename the channel name
B
A B C D E F G H I J K L M N O P Q R S T
U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ! : #
a b c d e f g h i j k l m n o p q r s t
u v w x y z ( ) + - . * _
Edit channel name
Name
(maximum: five characters)
select
set
Set characters
Store
RETURN
You can set characters
by using numeric buttons
(p. 34)
Note
If a VCR is connected only with the RF cable, edit [VCR].
[Auto Tuning] - Set all TV channels automatically
1 Start Auto Tuning 2 Settings are made automatically
Auto Tuning
All tuning data will be erased
Auto Tuning
Scan
EXIT
CH32
120
1
Automatically
retune all channels
received in the
area.
All the previous tuning settings are erased.
When the operation is completed, the channel at channel position [1] will be displayed.
Search begins in the order from the lower channels to the higher channels.
If tuning has not been done completely [Manual Tuning] (see below)
[Manual Tuning] - Set TV channel manually
5.5MHz
CH570
1 120
Manual Tuning
Fine Tuning
Manual Tuning
Sound System
Colour System
Store
Auto
Fine Tuning
Use to make small adjustments to the tuning of an individual
channel (affected by weather conditions, etc.)
Manual Tuning
Set TV channel manually after Auto Tuning.
Set Sound System and Colour System, and then perform this
function. Set Colour System [Auto] normally.
If a VCR is connected only with the RF cable, select channel position [0].
1 Select a channel position 2 Select a channel 3 Search 4 Select [Store]
jk l
ghi
mno
tuvpqrs
wxyz
abc def
CH
store
select