Panasonic PV-27DF4 TV DVD Combo User Manual


 
24
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
The following are possible audio broadcast
types and on-screen displays. The signal
being received is indicated with a “
” mark
while the selected audio mode is indicated
with an arrow. To change the audio mode for
these broadcasts, see the “Audio Mode for
TV Viewing” section.
Press DISPLAY to display the broadcast
signal being received.
MTS Stereo broadcast:
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
• If stereo broadcast is weak and the display
flickers, select MONO audio mode for possible
improvement.
SAP broadcast:
Secondary Audio Program (sub language).
Select SAP audio mode for the sub
language.
Press AUDIO to select the desired audio
mode as described above. (Arrow shows
selection.)
MONO broadcast:
Normal monaural sound broadcast.
< Example >
Equipped with -TV Noise Reduction
for true MTS reproduction.
-TV Noise
Reduction is required for good stereo
separation and audio fidelity.
is a
registered trademark, and is licensed by
Technology Licensing.
MTS Stereo and SAP broadcast:
Multi-channel Television Sound Stereo (main
language) and Secondary Audio Program
(sub language) broadcasts are being
received simultaneously. Select the STEREO
or SAP audio mode.
• Each press of
AUDIO will change
the audio mode as
shown below.
• “SAP” is selected
with first press of
AUDIO.
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO
DISPLAY
AUDIO
Receivable Broadcast Types
Audio Mode for TV Viewing
12:00AM CH 08
STEREO
SAP
MONO
MTS Broadcast / TV Stereo System