Filter
Top Products
53
Disc Operation
Enjoy a surround-like effect if you are using
two front speakers only. The effect is
broadened and sound seems to come from
virtual speakers on either side if the disc has
surround signals recorded on it.
Press VSS in Disc mode.
• The Surround sound effects can be changed by
pressing VSS repeatedly as shown in the figure
below.
• Turn off the surround effects on the other
equipment.
• V.S.S. will not work, or will have less effect, with
some discs.
• Turn V.S.S. off if it causes distortion.
VSS OFF
VSS1
VSS2
VSS3
Default
V.S.S. (Virtual Surround Sound)
• When appears on the screen while a button is being pressed, it means that the corresponding
operation is prohibited by the unit or the disc.
Notes
• This function not available with DVD-RAM.
• ANGLE Indicator lights up on the unit when a
scene recorded from different angles is detected.
• The angle number can be set beforehand so that
the angle is switched whenever ANGLE Indicator
lights up.
DVDs may contain scenes shot from multiple
camera angles allowing the same scene to
be viewed from different angles. You can
view these angles, if available, using the
ANGLE button.
1 Press ANGLE in Play mode to display
the angle selection on-screen.
2 Press ANGLE repeatedly to select
the desired angle.
• Display disappears after 5 seconds.
Number of angle being
played back.
ANGLE:1
SELECT :ANGLE
ANGLE:2
SELECT :ANGLE
Multiple Angle Viewing
DVD-V
Notes
DVD-V CD
DVD-RAM