Panasonic PV-DF2036M TV DVD Combo User Manual


 
26
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
5 Press PROG to set the
program. To Enter More
Programs, press ▲▼ to select
and SET to set a blank program
number, and then repeat step
4.
6 Press PROG twice to exit this mode.
• If you’re using a cable box, make sure that it is tuned to the desired
channel and the power is left on for timer recording.
• PROG TIMER indicator lights up on the unit.
1 Press PROG to display SET
PROGRAM screen.
2 Press ▲▼ to select “TIMER
PROGRAMMING.”
Repeat step 4 to set:
Start time, stop time
Channel (or LINE for outside source)
Speed (SP, SLP)
Set up to 8 Programs
You can set up to 8 programs to be recorded while you are
away.
4 Press ▲▼ to select and SET or
◄► to set the recording DATE.
• 1~31 = One time
• DAILY (day) = Monday~Friday
• WEEKLY (SU~SA) = Same time once a
week
Example:
Today’s Date
WEEKLY
(SA)
7
WEEKLY
(MO)
8
31
1
6
WEEKLY
(SU)
DAILY
(day)
3 Press SET to display screen.
• If a program is already in memory, press ▲▼, and SET to select an
unused program number.
Timer Recording
5 Press PROG twice to exit this mode.
To Replace program...
a. Press SET to display.
b. Press ▲▼ to select and press
SET or ◄► to set new program
contents.
c. Press PROG.
To Clear program...
Press ADD/DLT.
4 Press ▲▼ to select the desired
program.
Notes:
2 minutes before Timer recording is performed, “PLEASE PREPARE FOR
TIMER REC” appears and/or the PROG TIMER Indicator flashes. Be sure
a cassette with record tab is loaded and the unit is in Stop mode.
If the start times of two programs overlap, the lower numbered program
will have priority.
If the start time for a Timer Recording comes up during a normal recording
or One Touch Recording (page 25), the Timer Recording will not be
performed.
If there is a power interruption of more than one minute, the recording may
not be performed or continued.
If “INCOMPLETE” appears after all items have been set, check all entries
and make necessary corrections.
1 Press PROG to display SET
PROGRAM screen.
2 Press ▲▼ to select “TIMER
PROGRAMMING.”
3 Press SET to display screen.
Review, Replace or
Clear Program Con tents :
(Recording is not in progress)
1 Hold down STOP for a few seconds to cancel the
Timer Recording.
• Any future daily or weekly recordings will be performed as
programmed.
Cancel a Timer Re cord ing:
(Recording is in progress)
SET PROGRAM
TIMER PROGRAMMING
ON TIMER
SLEEP TIMER: 0
SELECT: SET:SET
END :PROG
P DT START STOP CH SPD
1 -- --:-- --:-- -- --
2 -- --:-- --:-- -- --
3 -- --:-- --:-- -- --
4 -- --:-- --:-- -- --
SELECT: SET:SET
END :PROG
P DT START STOP CH SPD
1 10 9:00a12:00p 08 SP
2 -- --:-- --:-- -- --
3 -- --:-- --:-- -- --
4 -- --:-- --:-- -- --
SET COMPLETED
CANCEL:ADD/DLT
SELECT: SET:SET
END :PROG
P DT START STOP CH SPD
1 10 9:00a12:00p 08 SP
2day 11:00a11:30a125 SP
3 12 8:00p 9:30p L1 SLP
4 -- --:-- --:-- -- --
CANCEL:ADD/DLT
SELECT: SET:SET
EXIT :PROG
P DT START STOP CH SPD
1 -- --:-- --:-- -- --
2day 11:00a11:30a125 SP
3 12 8:00p 9:30p L1 SLP
4 -- --:-- --:-- -- --
SELECT: SET:SET
END :PROG
SET PROGRAM
TIMER PROGRAMMING
ON TIMER
SLEEP TIMER: 0
SELECT: SET:SET
END :PROG
P DT START STOP CH SPD
1 10 9:00a12:00p 08 SP
2day 11:00a11:30a125 SP
3 12 8:00p 9:30p L1 SLP
4 -- --:-- --:-- -- --
CANCEL:ADD/DLT
SELECT: SET:SET
END :PROG