Panasonic TX-28PL4 CRT Television User Manual


 
15
The widescreen TV will allow you to enjoy viewing the picture at its maximum size, including
widescreen ‘cinema format’ pictures.
Note: Just mode is not available when viewing an RGB source.
Press the ASPECT button to move through the
six aspec t option s: Pana son ic Aut o, 4:3 , Zoom,
16:9 (Full), 14:9 and Just.
Panasonic Auto
Panasonic Auto determines the best aspect ratio to
use to display the picture you are viewing. It does this
using a four step process to determine if the picture
being viewed is a widescreen picture.
If Panasonic Auto detects a widescreen signal it
switches intothe appropriate 16:9or 14:9widescreen
mode. If Panasonic Auto does not detect a
widescreen signalthen the picture is displayed in Just
or 4:3 mode.
The text shown on the screen indicates how
Panasonic Auto determined which ratio to use:
’WIDE’ appears i n the top left of the screen if a
widescreeen identification signal (WSS) is found or a
signal found through a Scartsocket. Panasonic Auto
switches to the appropriate 16:9 or 14:9 widescreen
ratio
’PanasonicAuto’appears in the top left of the screen if
black stripes above and below the picture are
detected.Panasonic Auto chooses the best ratioand
expands thepicture tofill thescreen. This processcan
take several minutes, depending ho wdark the picture
is.
’Panasonic Auto’ appears in the top left of the screen
andredandgreen keysatthebottomif noindicationof
a widescreen signal is found, the picture is displayed
in Just or 4:3 mode. If the picture has a standard 4:3
aspectratio then you may prefer toview itat itsoriginal
size, the red and green keys that appear allow you to
choose between viewing at standard 4:3 size or
expanded in Just mode.
Equally, you may prefer to selec t one of the other
modes available to view the picture.
Notes:
D If, i n Panasonic Auto mode, you experience
problems with the screen display size when
playing back widescreen format recordings from
your VCR then it is possible that the tracking
control of your VCR req uires adjustment (your
VCR instruction book will contain adjustment
details).
D The widescreen aspec tratios of different films and
programmes can vary. If thes e are wider than a
standard 16:9 aspect picture then a black band
may bevisible at the topand bottom of thescreen.
ASPECT CONTROLS
A
SPECT
’Panasonic Auto’ appears in the top left of the screen,
The picture is displayed in Just or 4:3 mode,
red and green keys appear, allowing switching between
Just and 4:3 modes.
Panasonic Auto
4:3 Just
’Panasonic Auto’ appears in the top left of the screen,
The best ratio is chosen and the picture expanded to fill the screen.
’WIDE’ appears in the top left of the screen, Panasonic Auto
switches to the appropriate 16:9 or 14:9 widescreen ratio.
WIDE
Panasonic Auto