Filter
Top Products
18
How to Use Menu Functions
Menu
Item Adjustments / Congurations (alternatives)
Sound
Mode
Selects your favourite sound mode. [Music] / [Speech] / [User]
● The selected mode affects all input signals.
[Music]:
Improves sound quality for watching music videos, etc.
[Speech]:
Improves sound quality for watching news, drama, etc.
● In [Music] and [Speech] modes, you can adjust [Bass] and [Treble] settings,
and those settings will be stored for each mode.
[User]:
Adjusts the sounds manually by using the equaliser to suit your favourite
sound quality.
● For the [User] mode, [Equaliser] will appear on the [Sound Menu] instead of
[Bass] and [Treble]. Select [Equaliser] and adjust the frequency.
[Equaliser] (see below)
Bass Adjusts level to enhance or minimise lower, deeper sound output.
Treble Adjusts level to enhance or minimise sharper, higher sound output.
Equaliser
Adjusts the frequency level to suit your favourite sound quality.
● This function is available when [Mode] is set to [User].
● Select the frequency and change the frequency level by using the cursor
button.
● To enhance the bass sound, raise the level of the lower frequency.
To enhance the treble sound, raise the level of the higher frequency.
● To reset the levels of each frequency to the default settings, select
[Reset to Defaults] by using the cursor button, and then press button.
Balance
Adjusts volume level of right and left speakers.
Headphone Volume Adjusts the volume of the headphones.
Surround Surround sound settings. [Off] / [On]
Auto Gain Control
Automatically regulates large sound level differences between channels and
inputs. [Off] / [On]
Volume Correction Adjusts the volume of individual channel or input mode.
Speaker Distance to Wall
Compensates for the low frequency sound due to the distance between the
speakers and the wall. [Over 30cm] / [Up to 30cm]
● If the back space between the TV and wall is over 30 cm, [Over 30cm] is
recommended.
● If the back space between the TV and wall is within 30 cm, [Up to 30cm] is
recommended.
Preferred Audio 1
Preferred Audio 2
Selects the rst and second preferred language for DVB multi audio (depending
on the broadcaster).
MPX
Selects multiplex sound mode (if available)
[Stereo]: Use this normally.
[Mono]: When stereo signal cannot be received.
[M1] / [M2]: Available while mono signal is transmitted.
● For Analogue mode