Filter
Top Products
Fixing the display unit to the wall
Lift the display so that the upper insulating spacers at the back may fit
into the notched indentation at the top of the holding bracket, and then
lower the display into place.
1
1) Lift the display slightly and insert the lower insulating spacers at the
back of the display unit into the lower cutouts in the holding bracket.
2) Lower the display into the lower notched part of the cutouts.
2
Do not lift the display
too high or it may come
out of the notches in the
upper indentations.
Insert and fasten the screws at both the left and right sides.
3
To prevent the display
unit from becoming
detached from the
holding bracket, make
sure that both the left
and right fixing screws
are properly fitted.
Fixing screws (left and right)
Holding bracket
Fixing screw(M5)
2-7