Filter
Top Products
Before installing
Be sure to read through these instructions before starting the installation.
The installation should be only performed by a professional person.
If any parts are not installed correctly, the display unit may fall, possibly resulting in damage and personal injury.
Failure to follow Warning instructions may result in damage and personal injury.
Make sure that all safety conditions regarding strength at installation are observed.
If the installation strength is insufficient, the display unit may fall and personal injury may result.
Do not install in places which are unable to bear the weight of the display.
If the strength of the floor and wall at the site of installation is insufficient, the display unit may fall, possibly
resulting in damage and personal injury.
A caution indicates special precautions against actions which may result in fire or electric shock.
Do not install in places subject to humidity, dust, oil fumes, condensation or excessive heat.
These factors may adversely affect the Wide Plasma Display, possibly resulting in fire or electric shock.
Do not install the Wide Plasma Display horizontally with the screen facing up, or sideways or upside
down.
Installing the screen other than in the conventional viewing setting may cause heat to build up inside the display
and possibly result in fire.
Two persons are required to install and remove the display unit.
The display unit is heavy and at least two persons are needed to handle it safely. The display unit may drop and
personal injury may result if one person attempts to install it without assistance.
Maintain a space of at least 10 cm respectively at the top, bottom and sides of the display unit and at
least 1.9 cm at the rear of the display unit.
The display unit has air outlet holes at the top and air intake holes at the bottom and rear. These holes must not
be blocked, nor airflow not be obstructed. Otherwise fire may result.