Filter
Top Products
Mount the display in the ceiling unit.
Hook the display’s top insulating spacers in the ceiling unit by aligning
the display with the notches in the ceiling unit and sliding the display
downward.
1
Insert the bottom insulating spacers by lifting the display slightly, fitting
the bottom spacers into the holes, and then lowering the display.
2
When mounting the
display in the ceiling unit,
be sure the ceiling unit is
straight and not at an
angle.
6-7
Fixing screw (M5) 1 each
left and right sides
Do not lift the display too high. It may come unhooked from the unit.
Install the fixing screws
on the left and right to
prevent the display from
sliding out of the ceiling
unit.
Fix the display.
Install two fixing screws (M5, included) in the corresponding holes on the
ceiling unit (left and right).
3
Insulating spacer
Notch
Notch
Fixing screw (M5) x 2