Panasonic TY-ST42PW1 TV Video Accessories User Manual


 
Lift the display unit so that the upper insulating spacers at the back
may fit into the notched indentation at the top of the wall-hanging
bracket, and then lower the display unit into place.
1
1) Lift the display unit slightly and insert the lower insulating spacers
at the back of the display unit into the lower cutouts in the wall-
hanging bracket.
2) Lower the display unit into the lower notched part of the cutouts.
2
Do not lift the display
too high or it may come
out of the notches in the
upper indentations.
Insert and fasten the screws at both the left and right sides.
3
To prevent the display unit
from becoming detached
from the wall-hanging
bracket, make sure that
both the left and right
fixing screws are properly
fitted.
Attaching the display unit to the wall-
hanging bracket
Notches
Insultating spacer
Holding bracket
Fixing screws(left and right)
Fixing screw(M5)
4-6