Filter
Top Products
English
22
English
2
WARNING
Fitting work and connection equipment expansion should never be done by any other
than a qualified installation specialist.
• Incorrect fitting may cause equipment to fall, resulting in injury.
Include a safety factor when considering the strength of the proposed fitting location.
• If strength is not sufficient the equipment may fall, resulting in injury.
Do not fit at a location that cannot bear the load.
• If the fitting location lacks sufficient strength the equipment may fall.
CAUTION
Do not fit at any locations subject to humidity, dust, smoke, steam or heat.
• This may have an adverse effect on the plasma TV and cause fire or electric shock.
The work of fitting or removing the plasma TV must be performed by at least two people.
• The plasma TV may fall and cause injury.
Do not fit facing upwards, sideways or upside down.
• This may cause heat to build up inside the plasma TV unit, resulting in a fire.
Ensure there is a space of at least 100mm at the top, bottom and sides of the plasma TV,
and at least 89 mm clearance at the back.
• The plasma TV unit has air blow holes on the top, and air suction holes on the bottom and rear.
Covering these may result in a fire.
1) Exercise care when selecting the location for the TV because it may discolor or deform due to light or heat if it
is placed where it is exposed to direct sunlight, or near a heater.
2) Upkeep
Wipe with a dry cloth. If the unit is extremely soiled, first wipe off soiling with a neutral detergent diluted in
water, and then wipe with a dry cloth. Do not use cleaners such as benzene, thinner or furniture wax because
they may cause paint peeling. (If using a chemical wiping cloth, follow any precautions included.)
3) Do not affix adhesive tape or stickers to the product. Either may stain the wall hanging bracket or surface of the
wiring cover for close-to-the-wall installation.
Requests regarding handling
Safety precautions
[Always follow these precautions]