Filter
Top Products
3
English
Components
Wall-hanging bracket . . . x1
Insulation spacers . . . x4
Dished toothed washers . . . x4
Allen wrench (included tool)
. . . x1
Unit fastening screws
( M5-35) . . . x2
Allen head countersunk screws
(M8-50) . . . x4
TY-WK42PR2W Wall-hanging bracket (Adjustable angle type)
Precautions for wall-hanging bracket fitting
♦ The wall-hanging bracket is for use in attaching a plasma TV unit to a vertical wall for viewing. Do not fit to
any surface other than a vertical wall.
♦ To ensure correct plasma TV performance and prevent trouble, do not fit at any of the following locations.
• Near sprinklers or fire/smoke detectors
• Where there is a risk of exposure to vibration or impact
• Near high-voltage wires or dynamic power supplies
• Locations exposed to air blown from heating equipment
♦ Fit using techniques suited to the structure and materials of the fitting location.
♦ Use commercially available M6 screws suited to the wall surface material (wood, steel frame, concrete etc.)
for fitting the bracket to the wall.
♦ Fit so there is no contact between the attachment screws or power cord and any metal inside the wall.
♦ For the TV power supply plug, use a power supply outlet that can be reached easily.
♦ Ensure good air flow so that the equipment ambient temperature does not exceed 40°C. Failure to do this
may cause heat to build up inside the plasma TV, resulting in malfunction.