Pantel PAN320 Flat Panel Television User Manual


 
27/30
Infrared Ray Remote
Controller
Signal carrier frequency 38KHz
In/Out Connector
Video Input RCA pin (Composite), S connector
Video OutputThrough
output
RCA pin (Composite), S connector
Audio Input RCA pin L/R
Audio OutputThrough
Output
RCA pin L/R
IR Cable Mini Jack
Others
Size Width 220mm , Depth 150mm, Height 45mm
Weight 390g (only main body)
Power supplyAC adaptor
AC in 100-240V 50/60Hz 1.0A
DC out 12V(±5%) 2.5A
Power consumption Max approx. 6.5W
Operation environment Temperature 0-35 Humidity 20-80% (No Dew)
Approved Standard TELEC, FCC part15, CE
Chapter 4 Inputs/Outputs
VIDEO INPUT:
1. STV-1100TX supports the following video inputs:
Composite video input
S-Video input
(1) User may choose either input type, usually determined by the
connection available from the input video source device.
(2) The video input is selected by automatic detection of a video signal at
one of the inputs. If the two inputs become active simultaneously, the
order of precedence is: S-Video, Composite Video.
2. The video standard accepted by the VW-5TX is set by automatic detection of
the video standard (NTSC).
3. Video standard supports the following video inputs: NTSC-M, NTSC-Japan,
PAL[BGHI], SECAM.
4. This product supports the following VBI signals:
NTSC WSS (also known as CGMS or WSS525).
Macrovision (NTSC ONLY)
The VBI signals are accepted at the video inputs and transferred to the video
outputs.
5. The system support NTSC closed caption signals. The CC signals are
accepted at the video inputs and transferred to the video outputs.
6. The system is capable of accepting and outputting black and white signal (no