Filter
Top Products
28/30
colour component present).
AUDIO INPUT
1. STV-1100TX supports an analog stereo audio input, consisting of left and
Right audio channels.
VIDEO OUTPUT
1. STV-1100RX supports the following video outputs:
Composite video output
S-Video output
2. The two outputs are active simultaneously.
3. Video standard output NTSC is the same standard as the video input used.
4. Video standard supported on video outputs:
NTSC/480I
5. Support of the VBI signals:
NTSC WSS (also known as CGMS or WSS525)
Macrovision NTSC
6. Support of NTSC closed Caption signals
AUDIO OUTPUT
1. STV-1100RX supports an analog stereo audio output, consisting of Left and
Right audio channels.
Chapter 5 Pairing & Others
PAIRING (MATCHING) INSTALLATION
1. The STV1100 is already supplied paired (matched) from the factory.
2. If needed users can also pair manually using the following steps:
Supply power to and switch on both STV-1100TX and PANTEL HDTV
Connect the IR remote control cable to the back of the STV-1100TX
Position the units so the IR cable LED head from the STV-1100TX is
directed in front of the IR receiver window of the PANTEL HDTV
Then press the pairing button at the rear of the STV-1100TX for at least 2
second.
OTHERS
Product Dimensions: 220(w) x 150(d) x 45(h) mm
Power Adaptor: Input: AC100~240V 50/60Hz 1.0A
Output: DC12V 2.5A
Operation Temp: 0~40 degree C
This product is for indoor use only.